GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Transmission Leak
Re: [GMCnet] Transmission Leak [message #326426 is a reply to message #326425] Tue, 28 November 2017 07:13 Go to previous messageGo to previous message
USAussie is currently offline  USAussie   United States
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma:
Senior Member
Ken,

Nope, I've never tried these seals on a Ragusa pan.

You mentioned you tried O-rings and they squeezed out; the O-rings in these seals won't squeeze out.

I have no idea if the correct size is available or if they would work on a Ragusa pan.

My intent was to make you aware that they existed.

Regards,
Rob M.
The Pedantic Mechanic
Sydney, Australia
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
USA '77 Kingsley - TZE 267V100808


-----Original Message-----
From: Gmclist [mailto:gmclist-bounces@list.gmcnet.org] On Behalf Of Ken Henderson
Sent: Tuesday, November 28, 2017 6:47 AM
To: GMC Mail List
Subject: Re: [GMCnet] Transmission Leak

Seriously, Rob, have you tried them on a Ragusa pan? I haven't been able
to find the correct dimensions for the 5/16" Stat-o-Sea, but, extrapolating
from what I have found, they're probably 0.567" or so in diameter. The
Ragusa doesn't have that much machined area around the bolt holes. l had
to use socket head screws with 0.469" OD heads to even install them. Even
if the seating area was available, I wonder if the fastener's head being
smaller than the washer's OD would be a problem?

Ken H.



_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Winch
Next Topic: [GMCnet] Folding Step Stool on Sale at Harbor Freight
Goto Forum:
  


Current Time: Sun May 05 23:36:42 CDT 2024

Total time taken to generate the page: 0.01441 seconds