GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Transmission Leak
Re: [GMCnet] Transmission Leak [message #326425 is a reply to message #326423] Tue, 28 November 2017 06:47 Go to previous messageGo to previous message
Ken Henderson is currently offline  Ken Henderson   United States
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma:
Senior Member
Seriously, Rob, have you tried them on a Ragusa pan? I haven't been able
to find the correct dimensions for the 5/16" Stat-o-Sea, but, extrapolating
from what I have found, they're probably 0.567" or so in diameter. The
Ragusa doesn't have that much machined area around the bolt holes. l had
to use socket head screws with 0.469" OD heads to even install them. Even
if the seating area was available, I wonder if the fastener's head being
smaller than the washer's OD would be a problem?

Ken H.


On Tue, Nov 28, 2017 at 12:24 AM, Rob Mueller
wrote:

> Ken,
>
> I just sent you the link as an example of o-ring seals that could be used
> on bolts and not squeeze out.
>
> IIRC the bolts that hold the trans pan on are 5/16 X 18 so you'd have to
> select the right size.
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Winch
Next Topic: [GMCnet] Folding Step Stool on Sale at Harbor Freight
Goto Forum:
  


Current Time: Mon May 06 03:26:43 CDT 2024

Total time taken to generate the page: 0.53197 seconds