GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Transmission Leak
Re: [GMCnet] Transmission Leak [message #326329 is a reply to message #326328] Sat, 25 November 2017 14:12 Go to previous messageGo to previous message
jimk is currently offline  jimk   United States
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma:
Senior Member
When working with the stock metal pan, one must turn the pan upside down
and have a steel narrow bar under the bolt holes and use a ball peen hammer
and level it out.
Not a bad Idea to use some sealent aroung the gasket holes and never over
tighten.
Yo might want to check around the holes that leak as there might be a
remote possibility of a crack


On Sat, Nov 25, 2017 at 11:28 AM, tom geiger wrote:

> Ok, so now I'm in it. Doing the transmission pan thing. Had taken it yo a
> local truck and TV setvice center and that was not sucessfull after their
> third attempt, so I'm just going to follow your all good direction and do
> it myself. The dsng thing leaked like a sive after their third attempt. So
> here I go. Got the pan off and I definstly see some dippling at the bolt
> holes. Going to try to hammer those out. I do see those locations on the
> back
> flange where the lip edge was cut out for some reason. Not much edge there
> to seal up. Going to just isr a rubber composite gasket to see if it will
> sral. Keep my fingers crossed.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>



--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Winch
Next Topic: [GMCnet] Folding Step Stool on Sale at Harbor Freight
Goto Forum:
  


Current Time: Sun May 05 17:56:22 CDT 2024

Total time taken to generate the page: 0.01032 seconds