GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Brake shoe adjustment
Re: Brake shoe adjustment [message #322825 is a reply to message #322810] Mon, 28 August 2017 09:30 Go to previous messageGo to previous message
McCohens is currently offline  McCohens   United States
Messages: 22
Registered: March 2016
Location: Chalfont, PA
Karma:
Junior Member
OK, go the packer and grease, mid cylinders and seals, but I think the seals are wrong. They don't carry SKF sold me National 8974S. The lip of the seal to the edge of the metal is .240 but the dimension from the lip to the flat side(outer) is .260
Are these OK or do I have to keep hunting. My parts guy, who is pretty good, said SKF 21771 is NLA. Maybe just for him though.
Shoes are new, so I am not too concerned about adjustment initially. They will need to bed to the drums and further adjustment is planned. Looking forward to being able to stop this beast.
Just did master cylinder and prop vales, new fuel lines and tires. After a 10 year nap we are getting close to hitting the road again. Maybe...
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Black and Grey water tank reading
Next Topic: [GMCnet] Houston Floods
Goto Forum:
  


Current Time: Sun May 12 21:27:36 CDT 2024

Total time taken to generate the page: 0.14153 seconds