GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Brake shoe adjustment
Re: Brake shoe adjustment [message #322817 is a reply to message #322810] Mon, 28 August 2017 08:21 Go to previous messageGo to previous message
jhbridges is currently offline  jhbridges   United States
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma:
Senior Member
There's a test for those seals. On a flat surface, you should be able to pass a drill bit (1/4"? Someone help me here) betwee nthe seal material and the surface. Sometimes you are given seals with the sealing face too close to the side of the seal away from the bearing. Those have problems sealing properly.

--johnny


Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Black and Grey water tank reading
Next Topic: [GMCnet] Houston Floods
Goto Forum:
  


Current Time: Mon May 13 09:07:39 CDT 2024

Total time taken to generate the page: 0.01313 seconds