GMCforum: GMCnet » Mismatched Heads... Again

Home » Public Forums » GMCnet » Mismatched Heads... Again (The mystery deepens)

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Mismatched Heads Again [message #322711 is a reply to message #322709]

Sat, 26 August 2017 22:48

Carl S.

Messages: 4186
Registered: January 2009
Location: Tucson, AZ.

Karma:

Senior Member

Jim, These were good cores with hardened valve seats. Larry's engine & Marine (Tucson) put them together with new SS valves, guides, and springs. They had been milled about .010. The new gaskets were thicker than that plus the stock metal gaskets.

Carl Stouffer '75 ex Palm Beach Tucson, AZ. Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member

Report message to a moderator

[Message index]

		Mismatched Heads... Again By: Carl S. on Sat, 26 August 2017 18:43
		Re: [GMCnet] Mismatched Heads Again By: jimk on Sat, 26 August 2017 22:34
		Re: [GMCnet] Mismatched Heads Again By: Carl S. on Sat, 26 August 2017 22:48
		Re: [GMCnet] Mismatched Heads Again By: jimk on Sat, 26 August 2017 22:56
		Re: [GMCnet] Mismatched Heads Again By: Carl S. on Sat, 26 August 2017 23:10
		Re: Mismatched Heads... Again By: mrgmc3 on Sun, 27 August 2017 00:38

Previous Topic:	[GMCnet] Doom and Gloom
Next Topic:	Norm Wheatley's GMC rebuild series

Goto Forum:

-=] Back to Top [=-

Current Time: Sat May 18 23:50:20 CDT 2024

Total time taken to generate the page: 0.00660 seconds