Re: [GMCnet] Final Drive Intermediate Axle questions [message #322502 is a reply to message #322497] |
Tue, 22 August 2017 17:20 |
jhb1
Messages: 303 Registered: February 2004
Karma:
|
Senior Member |
|
|
[quote title=Richard Denney wrote on Tue, 22 August 2017 20:59]The hanger bearing and bracket is the same between the 3.21 and the 3.07.
The hanger includes a cup that retains the bearing in the outboard
direction, and a bolt-down retainer on the inboard side. Of course, the
final drive itself retains it in the inboard direction, and the half-shaft
and steering knuckle retains it in the outboard direction, so the hanger
only needs to k/SNIP
quote]
Rick
I was under the impression that the jack shaft hanger is diffferent between the 3.21 and 3.07 as whe John Biwersi changed mine a few years ago he changed the jack shat also
HTH
John H. Bell
77 Royale; QuadBag,Manny OneTon,Honda EV4010, FITech
Montreal Qc.
|
|
|