GMCforum: GMCnet » parts Carb .................

Home » Public Forums » GMCnet » parts Carb ................. (This carb is about to be recycled for the aluminum)

Show: Today's Messages :: Polls :: Message Navigator

Re: parts Carb ................. [message #322448 is a reply to message #322418]

Mon, 21 August 2017 09:17

JohnL455

Messages: 4447
Registered: October 2006
Location: Woodstock, IL

Karma:

Senior Member

If you can hang on to it a week or so I'll grab it for parts when I visit Waukegan. I get there every week or so Even if the body is corroded, I may be able to salvage some hardware and brackets etc.

John Lebetski
Woodstock, IL
77 Eleganza II

Report message to a moderator

[Message index]

		parts Carb ................. By: GatsbysCruise on Sun, 20 August 2017 13:17
		Re: [GMCnet] parts Carb ................. By: Kingsley Coach on Sun, 20 August 2017 17:22
		Re: [GMCnet] parts Carb ................. By: Ken Burton on Sun, 20 August 2017 23:57
		Re: [GMCnet] parts Carb ................. By: GatsbysCruise on Mon, 21 August 2017 01:24
		Re: parts Carb ................. By: JohnL455 on Mon, 21 August 2017 09:17
		Re: parts Carb ................. By: GatsbysCruise on Mon, 21 August 2017 10:47
		Re: parts Carb ................. By: JohnL455 on Mon, 21 August 2017 13:45

Previous Topic:	[GMCnet] Air Teck E8094 fuel pump. It does have a check valve built in.
Next Topic:	"DOOR" light on dash panel

Goto Forum:

-=] Back to Top [=-

Current Time: Wed May 15 01:17:53 CDT 2024

Total time taken to generate the page: 0.00742 seconds