GMCforum: GMCnet » starting the engine

Home » Public Forums » GMCnet » starting the engine

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] starting the engine [message #322094 is a reply to message #322088]

Mon, 14 August 2017 15:34

77Royale

Messages: 461
Registered: June 2014
Location: Mid Michigan

Karma:

Senior Member

Fuel filter change video. Easier to watch than type. Use line wrenches. so you dont strip the fuel line. ALWAYS put a second wrench on the filter housing so you dont damage that attempting to loosen the fuel line.

https://www.youtube.com/watch?v=WK0sqMI6mMs

When you push the gas pedal to the floor the choke plate should snap closed. You will see the plate close up and probably hear it. This is on a stone cold engine... If on a cold engine that choke plate is not nearly all the way closed up, it may need some adjustment. I recall that coach came from Meeshigun. Climate being somewhat similar I would be surprised if it wasn't correctly set up.

77 Royale, Rear Dry Bath. 403, 3.55 Final Drive, Lenzi goodies, Patterson carb and dizzy. Mid Michigan

Report message to a moderator

[Message index]

		starting the engine By: kstockwell on Sun, 06 August 2017 13:55
		Re: starting the engine By: shaunone on Sun, 06 August 2017 14:18
		Re: starting the engine By: kstockwell on Sun, 06 August 2017 14:26
		Re: starting the engine By: Carl S. on Sun, 06 August 2017 14:49
		Re: [GMCnet] starting the engine By: James Hupy on Sun, 06 August 2017 14:51
		Re: [GMCnet] starting the engine By: kstockwell on Sun, 06 August 2017 20:16
		Re: [GMCnet] starting the engine By: k2gkk on Sun, 06 August 2017 20:25
		Re: [GMCnet] starting the engine By: kstockwell on Sun, 06 August 2017 20:38
		Re: [GMCnet] starting the engine By: k2gkk on Sun, 06 August 2017 22:24
		Re: [GMCnet] starting the engine By: Richard Denney on Sun, 06 August 2017 22:57
		Re: starting the engine By: mrgmc3 on Sun, 06 August 2017 23:15
		Re: [GMCnet] starting the engine By: ljdavick on Mon, 07 August 2017 01:14
		Re: starting the engine By: Chris Tyler on Mon, 07 August 2017 04:24
		Re: [GMCnet] starting the engine By: Bruce Hart on Mon, 07 August 2017 06:13
		Re: [GMCnet] starting the engine By: kstockwell on Mon, 07 August 2017 07:15
		Re: starting the engine By: JohnL455 on Mon, 07 August 2017 08:56
		Re: starting the engine By: kstockwell on Sun, 13 August 2017 14:11
		Re: starting the engine By: kstockwell on Sun, 13 August 2017 14:35
		Re: [GMCnet] starting the engine By: Keith V on Mon, 14 August 2017 09:00
		Re: [GMCnet] starting the engine By: kstockwell on Mon, 14 August 2017 14:45
		Re: [GMCnet] starting the engine By: Keith V on Mon, 14 August 2017 15:20
		Re: [GMCnet] starting the engine By: kstockwell on Mon, 14 August 2017 18:00
		Re: [GMCnet] starting the engine By: 77Royale on Mon, 14 August 2017 15:34
		Re: [GMCnet] starting the engine By: kstockwell on Mon, 14 August 2017 18:25
		Re: [GMCnet] starting the engine By: k2gkk on Mon, 14 August 2017 16:21
		Re: [GMCnet] starting the engine By: kstockwell on Mon, 14 August 2017 18:02
		Re: [GMCnet] starting the engine By: k2gkk on Mon, 14 August 2017 20:35
		Re: [GMCnet] starting the engine By: Keith V on Tue, 15 August 2017 08:43
		Re: starting the engine By: JohnL455 on Tue, 15 August 2017 08:44
		Re: [GMCnet] starting the engine By: bdub on Tue, 15 August 2017 09:23
		Re: [GMCnet] starting the engine By: kstockwell on Wed, 16 August 2017 06:14
		Re: [GMCnet] starting the engine By: kstockwell on Wed, 16 August 2017 06:18
		Re: [GMCnet] starting the engine By: Richard Denney on Wed, 16 August 2017 07:03
		Re: [GMCnet] starting the engine By: USAussie on Wed, 16 August 2017 07:19
		Re: [GMCnet] starting the engine By: kstockwell on Wed, 16 August 2017 08:16
		Re: starting the engine By: jhbridges on Tue, 15 August 2017 11:05
		Re: starting the engine By: 77Royale on Wed, 16 August 2017 07:27
		Re: starting the engine By: kstockwell on Wed, 16 August 2017 19:17
		Re: starting the engine By: jhbridges on Thu, 17 August 2017 08:15
		Re: starting the engine By: kstockwell on Thu, 17 August 2017 10:11
		Re: [GMCnet] starting the engine By: James Hupy on Thu, 17 August 2017 10:26
		Re: [GMCnet] starting the engine By: jimk on Thu, 17 August 2017 11:02
		Re: [GMCnet] starting the engine By: kstockwell on Thu, 17 August 2017 11:29
		Re: [GMCnet] starting the engine By: kstockwell on Thu, 17 August 2017 17:35
		Re: [GMCnet] starting the engine By: James Hupy on Thu, 17 August 2017 18:00
		Re: [GMCnet] starting the engine By: kstockwell on Thu, 17 August 2017 18:19
		Re: [GMCnet] starting the engine By: James Hupy on Thu, 17 August 2017 18:25
		Re: [GMCnet] starting the engine By: kstockwell on Thu, 17 August 2017 18:35
		Re: [GMCnet] starting the engine By: kstockwell on Thu, 17 August 2017 18:34
		Re: [GMCnet] starting the engine By: kstockwell on Sun, 20 August 2017 08:05
		Re: [GMCnet] starting the engine By: James Hupy on Sun, 20 August 2017 09:00
		Re: [GMCnet] starting the engine By: kstockwell on Sun, 20 August 2017 09:29
		Re: starting the engine By: kstockwell on Sat, 19 August 2017 15:16
		Re: starting the engine By: C Boyd on Sat, 19 August 2017 19:00
		Re: starting the engine By: kstockwell on Sun, 20 August 2017 07:42

Previous Topic:	[GMCnet] Oil sputtering (4K) Onan
Next Topic:	Re: [GMCnet] Whitch speedometer fits in 1975 GMC Motor home

Goto Forum:

-=] Back to Top [=-

Current Time: Mon May 20 02:21:30 CDT 2024

Total time taken to generate the page: 0.01115 seconds