GMCforum: GMCnet » starting the engine

Home » Public Forums » GMCnet » starting the engine

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] starting the engine [message #321738 is a reply to message #321702]

Mon, 07 August 2017 01:14

ljdavick

Messages: 3548
Registered: March 2007
Location: Fremont, CA

Karma:

Senior Member

This won’t be any help - but I haven’t posted in a long time and I feel like tossing in 2-bits.

One of the first things I had Jim K’s guys install was an electric fuel pump. Turn the key and I could hear that woodpecker come to life. I was going to mount some rubber isolators on the frame so I wouldn’t have to listen to it until one day, when the coach didn’t start, I realized the woodpecker wasn’t home! I shinnied under the frame and found a loose connection. Peck-peck-peck I was running again.

I’ve never made friends with a carburetor, so I finally decided to install the Howell EFI with EBL and electronic distributor control. Over the past 2 1/2 years I haven’t given the motorhome much love, but when I go to start it up and give a run, it starts on the 3 revolution of the engine. Every time.

Oh - also the engine never does that embarrassing run-on after the switch is off, and there’s no such thing as vapor lock, so far.

So the take-away for me was to update to ’90’s technology to make up for my poor shade-tree mechanical skills.

Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, CA
Howell EFI + EBL + Electronic Distributor

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy

Report message to a moderator

[Message index]

		starting the engine By: kstockwell on Sun, 06 August 2017 13:55
		Re: starting the engine By: shaunone on Sun, 06 August 2017 14:18
		Re: starting the engine By: kstockwell on Sun, 06 August 2017 14:26
		Re: starting the engine By: Carl S. on Sun, 06 August 2017 14:49
		Re: [GMCnet] starting the engine By: James Hupy on Sun, 06 August 2017 14:51
		Re: [GMCnet] starting the engine By: kstockwell on Sun, 06 August 2017 20:16
		Re: [GMCnet] starting the engine By: k2gkk on Sun, 06 August 2017 20:25
		Re: [GMCnet] starting the engine By: kstockwell on Sun, 06 August 2017 20:38
		Re: [GMCnet] starting the engine By: k2gkk on Sun, 06 August 2017 22:24
		Re: [GMCnet] starting the engine By: Richard Denney on Sun, 06 August 2017 22:57
		Re: starting the engine By: mrgmc3 on Sun, 06 August 2017 23:15
		Re: [GMCnet] starting the engine By: ljdavick on Mon, 07 August 2017 01:14
		Re: starting the engine By: Chris Tyler on Mon, 07 August 2017 04:24
		Re: [GMCnet] starting the engine By: Bruce Hart on Mon, 07 August 2017 06:13
		Re: [GMCnet] starting the engine By: kstockwell on Mon, 07 August 2017 07:15
		Re: starting the engine By: JohnL455 on Mon, 07 August 2017 08:56
		Re: starting the engine By: kstockwell on Sun, 13 August 2017 14:11
		Re: starting the engine By: kstockwell on Sun, 13 August 2017 14:35
		Re: [GMCnet] starting the engine By: Keith V on Mon, 14 August 2017 09:00
		Re: [GMCnet] starting the engine By: kstockwell on Mon, 14 August 2017 14:45
		Re: [GMCnet] starting the engine By: Keith V on Mon, 14 August 2017 15:20
		Re: [GMCnet] starting the engine By: kstockwell on Mon, 14 August 2017 18:00
		Re: [GMCnet] starting the engine By: 77Royale on Mon, 14 August 2017 15:34
		Re: [GMCnet] starting the engine By: kstockwell on Mon, 14 August 2017 18:25
		Re: [GMCnet] starting the engine By: k2gkk on Mon, 14 August 2017 16:21
		Re: [GMCnet] starting the engine By: kstockwell on Mon, 14 August 2017 18:02
		Re: [GMCnet] starting the engine By: k2gkk on Mon, 14 August 2017 20:35
		Re: [GMCnet] starting the engine By: Keith V on Tue, 15 August 2017 08:43
		Re: starting the engine By: JohnL455 on Tue, 15 August 2017 08:44
		Re: [GMCnet] starting the engine By: bdub on Tue, 15 August 2017 09:23
		Re: [GMCnet] starting the engine By: kstockwell on Wed, 16 August 2017 06:14
		Re: [GMCnet] starting the engine By: kstockwell on Wed, 16 August 2017 06:18
		Re: [GMCnet] starting the engine By: Richard Denney on Wed, 16 August 2017 07:03
		Re: [GMCnet] starting the engine By: USAussie on Wed, 16 August 2017 07:19
		Re: [GMCnet] starting the engine By: kstockwell on Wed, 16 August 2017 08:16
		Re: starting the engine By: jhbridges on Tue, 15 August 2017 11:05
		Re: starting the engine By: 77Royale on Wed, 16 August 2017 07:27
		Re: starting the engine By: kstockwell on Wed, 16 August 2017 19:17
		Re: starting the engine By: jhbridges on Thu, 17 August 2017 08:15
		Re: starting the engine By: kstockwell on Thu, 17 August 2017 10:11
		Re: [GMCnet] starting the engine By: James Hupy on Thu, 17 August 2017 10:26
		Re: [GMCnet] starting the engine By: jimk on Thu, 17 August 2017 11:02
		Re: [GMCnet] starting the engine By: kstockwell on Thu, 17 August 2017 11:29
		Re: [GMCnet] starting the engine By: kstockwell on Thu, 17 August 2017 17:35
		Re: [GMCnet] starting the engine By: James Hupy on Thu, 17 August 2017 18:00
		Re: [GMCnet] starting the engine By: kstockwell on Thu, 17 August 2017 18:19
		Re: [GMCnet] starting the engine By: James Hupy on Thu, 17 August 2017 18:25
		Re: [GMCnet] starting the engine By: kstockwell on Thu, 17 August 2017 18:35
		Re: [GMCnet] starting the engine By: kstockwell on Thu, 17 August 2017 18:34
		Re: [GMCnet] starting the engine By: kstockwell on Sun, 20 August 2017 08:05
		Re: [GMCnet] starting the engine By: James Hupy on Sun, 20 August 2017 09:00
		Re: [GMCnet] starting the engine By: kstockwell on Sun, 20 August 2017 09:29
		Re: starting the engine By: kstockwell on Sat, 19 August 2017 15:16
		Re: starting the engine By: C Boyd on Sat, 19 August 2017 19:00
		Re: starting the engine By: kstockwell on Sun, 20 August 2017 07:42

Previous Topic:	[GMCnet] Oil sputtering (4K) Onan
Next Topic:	Re: [GMCnet] Whitch speedometer fits in 1975 GMC Motor home

Goto Forum:

-=] Back to Top [=-

Current Time: Mon May 20 02:56:24 CDT 2024

Total time taken to generate the page: 0.57969 seconds