| Body Pads [message #320907] |
Sun, 23 July 2017 16:22  |
 |
Jerry Sitzlar
Messages: 206
Registered: February 2013
Location: Lenoir City, TN
Karma:
|
Senior Member |
|
|
I'm in the middle of replacing/installing body pads and have run into a problem. I removed the four donuts at each end and the two clamps on each side. I jacked up the left side right behind the generator with my bottle jack about one inch, cleaned with acetone and glued and screwed a new pad into place. I moved over to the right side and tried to jack it up but it started lifting the frame with the body. I looked at every thing I thought maybe could still be holding them together. I had earlier removed my Ragusa step. The black tank is fastened to the frame and the body can be lifted about three inches before the drain pipe interferes. QUESTION: What am I overlooking?
Thanks,
Jerry
Jerry Sitzlar..... 77 Eleganza II, Twin bed, dry bath...... Lenoir City, TN (near Knoxville)
[Updated on: Sun, 23 July 2017 17:28] Report message to a moderator |
|
|
|
GMCforum
Search
Help
Register
Login
Home
