GMCforum: GMCnet » Portable Macerators

Home » Public Forums » GMCnet » Portable Macerators

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Portable Macerators [message #321084 is a reply to message #321072]

Tue, 25 July 2017 15:29

w schurman

Messages: 49
Registered: June 2015

Karma:

Member

Other than installing a Norcold three way in my '78 Palm beach the most
useful modification was installing a Denny Allen macerator kit. Not only is
it easy and painless to dump but I like to use it when some SOB pulls along
side and goes through all the effort to get the three inch hose out hook it
up drain it out then struggle to clean it out etc. By then I'm long gone.

On Tue, Jul 25, 2017 at 11:41 AM, Jim Kanomata
wrote:

> Always dump the Black first then followed up with gray to clear the black
> ad the smell.
> That is if you have the two tank system.
>
> On Tue, Jul 25, 2017 at 10:11 AM, Justin Brady wrote:
>
>> Tom, I believe as long as the pump is not run completely dry you're fine.
>> You just need enough liquid to keep the impeller lubricated against it's
>> housing. I run it until the noise changes and then another minute or so
>> after that.
>> --
>> Justin Brady
>> http://www.thegmcrv.com/
>> 1976 Palm Beach 455
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Newark,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
William S. Schurman
box 772806
Steamboat Springs, CO
80477
1978 Palm Beach
TZE168V100258
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		Portable Macerators By: Ronald Pottol on Sat, 22 July 2017 23:14
		Re: Portable Macerators By: eagleman 73 Sequoia 26 on Sun, 23 July 2017 07:03
		Re: Portable Macerators By: tphipps on Sun, 23 July 2017 08:03
		Re: [GMCnet] Portable Macerators By: Ken Henderson on Sun, 23 July 2017 09:48
		Re: [GMCnet] Portable Macerators By: powerjon on Sun, 23 July 2017 09:07
		Re: [GMCnet] Portable Macerators By: Ken Henderson on Sun, 23 July 2017 07:56
		Re: [GMCnet] Portable Macerators By: James Hupy on Sun, 23 July 2017 15:39
		Re: Portable Macerators By: jhbridges on Sun, 23 July 2017 08:23
		Re: Portable Macerators By: Scott Nutter on Sun, 23 July 2017 10:18
		Re: [GMCnet] Portable Macerators By: William Shourt on Sun, 23 July 2017 12:17
		Re: [GMCnet] Portable Macerators By: Ken Henderson on Sun, 23 July 2017 12:32
		Re: [GMCnet] Portable Macerators By: USAussie on Sun, 23 July 2017 17:45
		Re: [GMCnet] Portable Macerators By: emerystora on Sun, 23 July 2017 19:14
		Re: Portable Macerators By: Scott Nutter on Sun, 23 July 2017 14:15
		Re: [GMCnet] Portable Macerators By: Ken Henderson on Sun, 23 July 2017 14:32
		Re: [GMCnet] Portable Macerators By: Rollerg on Sun, 23 July 2017 15:06
		Re: [GMCnet] Portable Macerators By: jimk on Sun, 23 July 2017 16:01
		Re: Portable Macerators By: Scott Nutter on Sun, 23 July 2017 18:35
		Re: [GMCnet] Portable Macerators By: USAussie on Mon, 24 July 2017 01:51
		Re: [GMCnet] Portable Macerators By: Ken Henderson on Mon, 24 July 2017 06:11
		Re: [GMCnet] Portable Macerators By: USAussie on Mon, 24 July 2017 07:10
		Re: [GMCnet] Portable Macerators By: Ronald Pottol on Mon, 24 July 2017 08:30
		Re: [GMCnet] Portable Macerators By: Loffen on Mon, 24 July 2017 09:05
		Re: [GMCnet] Portable Macerators By: Richard Denney on Mon, 24 July 2017 07:11
		Re: Portable Macerators By: Scott Nutter on Sun, 23 July 2017 20:08
		Re: Portable Macerators By: JShot on Sun, 23 July 2017 20:39
		Re: [GMCnet] Portable Macerators By: Emery Stora on Sun, 23 July 2017 21:36
		Re: [GMCnet] Portable Macerators By: jimk on Sun, 23 July 2017 22:25
		Re: [GMCnet] Portable Macerators By: Ronald Pottol on Mon, 24 July 2017 00:41
		Re: [GMCnet] Portable Macerators By: USAussie on Mon, 24 July 2017 01:11
		Re: [GMCnet] Portable Macerators By: Ronald Pottol on Mon, 24 July 2017 08:28
		Re: Portable Macerators By: Larry on Sun, 23 July 2017 20:48
		Re: Portable Macerators By: Scott Nutter on Sun, 23 July 2017 20:55
		Re: Portable Macerators By: Scott Nutter on Mon, 24 July 2017 18:11
		Re: [GMCnet] Portable Macerators By: k2gkk on Mon, 24 July 2017 18:57
		Re: Portable Macerators By: lw8000 on Tue, 25 July 2017 11:02
		Re: Portable Macerators By: Justin Brady on Tue, 25 July 2017 11:45
		Re: Portable Macerators By: Tomtom on Tue, 25 July 2017 12:05
		Re: Portable Macerators By: Justin Brady on Tue, 25 July 2017 12:11
		Re: [GMCnet] Portable Macerators By: jimk on Tue, 25 July 2017 12:41
		Re: [GMCnet] Portable Macerators By: w schurman on Tue, 25 July 2017 15:29
		Re: Portable Macerators By: Tomtom on Tue, 25 July 2017 19:39
		Re: Portable Macerators By: Bill Van Vlack on Tue, 25 July 2017 20:49
		Re: Portable Macerators By: JShot on Tue, 25 July 2017 21:35
		Re: Portable Macerators By: Bill Van Vlack on Wed, 26 July 2017 14:15
		Re: Portable Macerators By: Bill Van Vlack on Wed, 26 July 2017 20:12
		Re: Portable Macerators By: JShot on Wed, 26 July 2017 20:39

Previous Topic:	Squeaky AC Belt
Next Topic:	a/c outside air mod

Goto Forum:

-=] Back to Top [=-

Current Time: Tue May 14 06:11:27 CDT 2024

Total time taken to generate the page: 0.01040 seconds