GMCforum: GMCnet » Portable Macerators

Home » Public Forums » GMCnet » Portable Macerators

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Portable Macerators [message #320961 is a reply to message #320959]

Mon, 24 July 2017 09:05

Loffen

Messages: 1087
Registered: August 2013
Location: Norway

Karma:

Senior Member

I have done one permanent istallation using the thetford sanicon pump ( http://www.ebay.com/itm/Thetford-70246-Sanicon-Tank-Buddy-Direct-with-21-Retractable-Hose-/222293134944?hash=item33c1b40e60 ) and will soon do another on my coach.
It is a pretty simple installation using most part in the kit and you will only need to add a couple of items like a hose clamp and if you are fancy a remote wireless switch ( http://www.ebay.com/itm/12-Volt-ON-OFF-Remote-Control-For-Seaflo-topsflo-shurflo-water-pump-/201536513050?hash=item2eec83241a )
You will of course use the wires, switch and fuse holder that comes with the pump, I did use the bracket as a rear support, it is just to flip it over and bend it a little, I did also need a 3" adapter ( http://www.ebay.com/itm/RV-Camper-Trailer-Plumbing-Sewage-Bayonet-x-Hub-3-Termination-Adapter/262783911195?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p 2060353.m2749.l2649 )to mount the pump to the original tubing and a hose clamp to secure it.
As the pump hose is flexible I did just route it towards the rear bumper and I will still have 17-18' of usable hose left, works as a charm Smile

1973 23' # 1848 Sky Blue Glacier called Baby Blue and a 1973 26'-3 # 1460 Parrot green Seqouia Known as the Big Green, And sold my 1973 26'-2 # 581 White Canyon lands under the name Dobbelt trøbbel in Norway

Report message to a moderator

[Message index]

		Portable Macerators By: Ronald Pottol on Sat, 22 July 2017 23:14
		Re: Portable Macerators By: eagleman 73 Sequoia 26 on Sun, 23 July 2017 07:03
		Re: Portable Macerators By: tphipps on Sun, 23 July 2017 08:03
		Re: [GMCnet] Portable Macerators By: Ken Henderson on Sun, 23 July 2017 09:48
		Re: [GMCnet] Portable Macerators By: powerjon on Sun, 23 July 2017 09:07
		Re: [GMCnet] Portable Macerators By: Ken Henderson on Sun, 23 July 2017 07:56
		Re: [GMCnet] Portable Macerators By: James Hupy on Sun, 23 July 2017 15:39
		Re: Portable Macerators By: jhbridges on Sun, 23 July 2017 08:23
		Re: Portable Macerators By: Scott Nutter on Sun, 23 July 2017 10:18
		Re: [GMCnet] Portable Macerators By: William Shourt on Sun, 23 July 2017 12:17
		Re: [GMCnet] Portable Macerators By: Ken Henderson on Sun, 23 July 2017 12:32
		Re: [GMCnet] Portable Macerators By: USAussie on Sun, 23 July 2017 17:45
		Re: [GMCnet] Portable Macerators By: emerystora on Sun, 23 July 2017 19:14
		Re: Portable Macerators By: Scott Nutter on Sun, 23 July 2017 14:15
		Re: [GMCnet] Portable Macerators By: Ken Henderson on Sun, 23 July 2017 14:32
		Re: [GMCnet] Portable Macerators By: Rollerg on Sun, 23 July 2017 15:06
		Re: [GMCnet] Portable Macerators By: jimk on Sun, 23 July 2017 16:01
		Re: Portable Macerators By: Scott Nutter on Sun, 23 July 2017 18:35
		Re: [GMCnet] Portable Macerators By: USAussie on Mon, 24 July 2017 01:51
		Re: [GMCnet] Portable Macerators By: Ken Henderson on Mon, 24 July 2017 06:11
		Re: [GMCnet] Portable Macerators By: USAussie on Mon, 24 July 2017 07:10
		Re: [GMCnet] Portable Macerators By: Ronald Pottol on Mon, 24 July 2017 08:30
		Re: [GMCnet] Portable Macerators By: Loffen on Mon, 24 July 2017 09:05
		Re: [GMCnet] Portable Macerators By: Richard Denney on Mon, 24 July 2017 07:11
		Re: Portable Macerators By: Scott Nutter on Sun, 23 July 2017 20:08
		Re: Portable Macerators By: JShot on Sun, 23 July 2017 20:39
		Re: [GMCnet] Portable Macerators By: Emery Stora on Sun, 23 July 2017 21:36
		Re: [GMCnet] Portable Macerators By: jimk on Sun, 23 July 2017 22:25
		Re: [GMCnet] Portable Macerators By: Ronald Pottol on Mon, 24 July 2017 00:41
		Re: [GMCnet] Portable Macerators By: USAussie on Mon, 24 July 2017 01:11
		Re: [GMCnet] Portable Macerators By: Ronald Pottol on Mon, 24 July 2017 08:28
		Re: Portable Macerators By: Larry on Sun, 23 July 2017 20:48
		Re: Portable Macerators By: Scott Nutter on Sun, 23 July 2017 20:55
		Re: Portable Macerators By: Scott Nutter on Mon, 24 July 2017 18:11
		Re: [GMCnet] Portable Macerators By: k2gkk on Mon, 24 July 2017 18:57
		Re: Portable Macerators By: lw8000 on Tue, 25 July 2017 11:02
		Re: Portable Macerators By: Justin Brady on Tue, 25 July 2017 11:45
		Re: Portable Macerators By: Tomtom on Tue, 25 July 2017 12:05
		Re: Portable Macerators By: Justin Brady on Tue, 25 July 2017 12:11
		Re: [GMCnet] Portable Macerators By: jimk on Tue, 25 July 2017 12:41
		Re: [GMCnet] Portable Macerators By: w schurman on Tue, 25 July 2017 15:29
		Re: Portable Macerators By: Tomtom on Tue, 25 July 2017 19:39
		Re: Portable Macerators By: Bill Van Vlack on Tue, 25 July 2017 20:49
		Re: Portable Macerators By: JShot on Tue, 25 July 2017 21:35
		Re: Portable Macerators By: Bill Van Vlack on Wed, 26 July 2017 14:15
		Re: Portable Macerators By: Bill Van Vlack on Wed, 26 July 2017 20:12
		Re: Portable Macerators By: JShot on Wed, 26 July 2017 20:39

Previous Topic:	Squeaky AC Belt
Next Topic:	a/c outside air mod

Goto Forum:

-=] Back to Top [=-

Current Time: Mon May 13 19:25:44 CDT 2024

Total time taken to generate the page: 0.00972 seconds