GMCforum: GMCnet » Portable Macerators

Home » Public Forums » GMCnet » Portable Macerators

Show: Today's Messages :: Polls :: Message Navigator

Re: Portable Macerators [message #320916 is a reply to message #320867]

Sun, 23 July 2017 18:35

Scott Nutter

Messages: 782
Registered: January 2015
Location: Houston/San Diego

Karma:

Senior Member

Rob,

My coach has a 16 gallon gray tank, and a 23 gallon black tank. My shower head has all the water restrictors removed, so it moves a lot of water. And the tankless water heater provides never ending hot water(as long as you have water). So taking a shower in my coach is no different than taking a shower in ones home. Except for the elbow room!

I have not had a chance to measure how many gallons of water one would use while showering in my shower, but it has to be more than 16 gallons. I assume my water flow with a 50 lb water regulator inline is at least 3.5 gallons per minute(and that's a wag). So a 5 minute shower will drain 17.5 gallons. Even a 2 gallon a minute flow only gives one a 8 minute shower. I can shower within these parameters, but the ladies??? And I want to make it as comfortable for them as possible.

So that's why I would need some sort of on switch for the macerator. I don't have the the large holding tanks that you have. But if my tanks ever go out, I'm going with the large single tank.

A float system inside the tank to tell the macerator to come on line automatically would be nice! Hint, hint!!

Scott

Scott Nutter 1978 Royale Center Kitchen, Patterson 455, switch pitch tranny, 3.21 final drive, Quad bags, Dave Lenzi super duty mid axle disc brakes, tankless water heater, everything Lenzi. Alex Ferrera installed MSD Atomic EFI Houston, Texas

Report message to a moderator

[Message index]

		Portable Macerators By: Ronald Pottol on Sat, 22 July 2017 23:14
		Re: Portable Macerators By: eagleman 73 Sequoia 26 on Sun, 23 July 2017 07:03
		Re: Portable Macerators By: tphipps on Sun, 23 July 2017 08:03
		Re: [GMCnet] Portable Macerators By: Ken Henderson on Sun, 23 July 2017 09:48
		Re: [GMCnet] Portable Macerators By: powerjon on Sun, 23 July 2017 09:07
		Re: [GMCnet] Portable Macerators By: Ken Henderson on Sun, 23 July 2017 07:56
		Re: [GMCnet] Portable Macerators By: James Hupy on Sun, 23 July 2017 15:39
		Re: Portable Macerators By: jhbridges on Sun, 23 July 2017 08:23
		Re: Portable Macerators By: Scott Nutter on Sun, 23 July 2017 10:18
		Re: [GMCnet] Portable Macerators By: William Shourt on Sun, 23 July 2017 12:17
		Re: [GMCnet] Portable Macerators By: Ken Henderson on Sun, 23 July 2017 12:32
		Re: [GMCnet] Portable Macerators By: USAussie on Sun, 23 July 2017 17:45
		Re: [GMCnet] Portable Macerators By: emerystora on Sun, 23 July 2017 19:14
		Re: Portable Macerators By: Scott Nutter on Sun, 23 July 2017 14:15
		Re: [GMCnet] Portable Macerators By: Ken Henderson on Sun, 23 July 2017 14:32
		Re: [GMCnet] Portable Macerators By: Rollerg on Sun, 23 July 2017 15:06
		Re: [GMCnet] Portable Macerators By: jimk on Sun, 23 July 2017 16:01
		Re: Portable Macerators By: Scott Nutter on Sun, 23 July 2017 18:35
		Re: [GMCnet] Portable Macerators By: USAussie on Mon, 24 July 2017 01:51
		Re: [GMCnet] Portable Macerators By: Ken Henderson on Mon, 24 July 2017 06:11
		Re: [GMCnet] Portable Macerators By: USAussie on Mon, 24 July 2017 07:10
		Re: [GMCnet] Portable Macerators By: Ronald Pottol on Mon, 24 July 2017 08:30
		Re: [GMCnet] Portable Macerators By: Loffen on Mon, 24 July 2017 09:05
		Re: [GMCnet] Portable Macerators By: Richard Denney on Mon, 24 July 2017 07:11
		Re: Portable Macerators By: Scott Nutter on Sun, 23 July 2017 20:08
		Re: Portable Macerators By: JShot on Sun, 23 July 2017 20:39
		Re: [GMCnet] Portable Macerators By: Emery Stora on Sun, 23 July 2017 21:36
		Re: [GMCnet] Portable Macerators By: jimk on Sun, 23 July 2017 22:25
		Re: [GMCnet] Portable Macerators By: Ronald Pottol on Mon, 24 July 2017 00:41
		Re: [GMCnet] Portable Macerators By: USAussie on Mon, 24 July 2017 01:11
		Re: [GMCnet] Portable Macerators By: Ronald Pottol on Mon, 24 July 2017 08:28
		Re: Portable Macerators By: Larry on Sun, 23 July 2017 20:48
		Re: Portable Macerators By: Scott Nutter on Sun, 23 July 2017 20:55
		Re: Portable Macerators By: Scott Nutter on Mon, 24 July 2017 18:11
		Re: [GMCnet] Portable Macerators By: k2gkk on Mon, 24 July 2017 18:57
		Re: Portable Macerators By: lw8000 on Tue, 25 July 2017 11:02
		Re: Portable Macerators By: Justin Brady on Tue, 25 July 2017 11:45
		Re: Portable Macerators By: Tomtom on Tue, 25 July 2017 12:05
		Re: Portable Macerators By: Justin Brady on Tue, 25 July 2017 12:11
		Re: [GMCnet] Portable Macerators By: jimk on Tue, 25 July 2017 12:41
		Re: [GMCnet] Portable Macerators By: w schurman on Tue, 25 July 2017 15:29
		Re: Portable Macerators By: Tomtom on Tue, 25 July 2017 19:39
		Re: Portable Macerators By: Bill Van Vlack on Tue, 25 July 2017 20:49
		Re: Portable Macerators By: JShot on Tue, 25 July 2017 21:35
		Re: Portable Macerators By: Bill Van Vlack on Wed, 26 July 2017 14:15
		Re: Portable Macerators By: Bill Van Vlack on Wed, 26 July 2017 20:12
		Re: Portable Macerators By: JShot on Wed, 26 July 2017 20:39

Previous Topic:	Squeaky AC Belt
Next Topic:	a/c outside air mod

Goto Forum:

-=] Back to Top [=-

Current Time: Tue May 14 15:32:40 CDT 2024

Total time taken to generate the page: 0.01842 seconds