GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] WE ALL NEED MORE AIR
[GMCnet] WE ALL NEED MORE AIR [message #320582] Mon, 17 July 2017 09:55 Go to previous message
Thomas Pryor is currently offline  Thomas Pryor   United States
Messages: 143
Registered: January 2011
Karma:
Senior Member
Hi Folks. I just completed a modification to my HVAC box that can easily
copied by any and all.

It is generally known that the air flow in our OEM HVAC boxes are anemic at
best. The "why" in my opinion is the side mounted squirrel cage fan expels
air that must change directions twice before getting to cooling or heating
fins. It is generally agreed that the capacity of our A/C compressor and
system is sufficient. After reviewing the efforts of Ken Henderson and
others I wondered if there might be a way to modify the system without
removing the whole HVAC box to improve air flow and efficiency.

This modification is JWID:

1. It requires cutting an access hole in the floor of the coach to get
access to the Lower portion of the HVAC box, then cutting two square
holes in the box.

http://www.gmcmhphotos.com/
photos/i-need-more-air/p63444-thumb-img-0955-1024.html

2. I then Fashioned a Plenum to connect the floor to box.
http://www.gmcmhphotos.com/
photos/i-need-more-air/p63448-plenum-sketch.html
http://www.gmcmhphotos.com/
photos/i-need-more-air/p63449-thumb-img-0957-10241.html

3. A new floor insert was made and installed to accommodate a MCC
fan blower, PN 515 (
http://www.mcc-hvac.com/wp-content/uploads/2014/03/Blowers.pdf)

http://www.gmcmhphotos.com/photos/i-need-more-air/p63445-img-0967.html

http://www.gmcmhphotos.com/photos/i-need-more-air/p63447-img-0969.html

The OEM fan and fan and fan duct will be removed and filled with aluminum
plate. The Hi, Med, and Lo wiring will be transferred to the new Blower
fan. BTW this fan already has Hi, Med and Lo hook ups with appropriate
resistance devices built in. In addition, all the dash controls are not
molested and will function as original. I plan to have a nice teak
enclosure with filters to cover the ugliness of the fan.

Any and all comments are required!



--
Regards,

Tom Pryor
4188 Limerick Dr
Lake Wales, Fl 33859
Cell 248 470 9186

Living on a waterfront is not a matter of life or death. Its more
important than that.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] down spout pipe
Next Topic: [GMCnet] Wheels
Goto Forum:
  


Current Time: Fri Apr 19 03:22:39 CDT 2024

Total time taken to generate the page: 0.00890 seconds