GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] WE ALL NEED MORE AIR
Re: [GMCnet] WE ALL NEED MORE AIR [message #321587 is a reply to message #321584] Thu, 03 August 2017 14:47 Go to previous messageGo to previous message
jimk is currently offline  jimk   United States
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma:
Senior Member
We need to determin feet per min. velocity through the Coil, as we know
anything over 500 ft/min face volocity can cause the condensate to blow
into the ducts and water droplets will be a problem. Having a 3-4 speed can
help avoid that to some degree.
If there is a way to find the data of our origional blower , it might guide
one to avoid problems.
We can take data off all the outlets and try to get approximate cfm it
produces at MAX.
Average Vel times the area of each and add them up. We have the
instruments, but now for me to do it.

On Thu, Aug 3, 2017 at 11:47 AM, John Phillips
wrote:

> To bad it does not list a 17-39-22
> There are 3 blowers listing that I think could work
> http://www.spalautomotive.com/eng/products/view_centrifugal.
> aspx?id=017-A40-73
> http://www.spalautomotive.com/eng/products/view_centrifugal.
> aspx?id=017-A46-73
> http://www.spalautomotive.com/eng/products/view_centrifugal.
> aspx?id=017-A54-73
>
>
> On Thu, Aug 3, 2017 at 11:19 AM, KB wrote:
>
>> johnd01 wrote on Thu, 03 August 2017 10:11
>>> ​I did see some specs for the 15-1556 before I found it on Amazon. As I
>>> recall it was 14 amps max and 800 CFM at 1 inch of water. I will see if
>> I can find the data again. ​
>>
>>
>> That would be awesome. FWIW, here's a really good page I found for the
>> SPAL blower models:
>> http://www.spalautomotive.com/eng/products/centrifugal_12D.aspx
>>
>> We're trying to figure out what the oem blower runs in terms of amps.
> The
>> fusible link is 30 amps,
>> so has to run much less than that.
>>
>> Also, what size is the oem blower wheel? I'm having trouble finding
> that
>> info.
>> I think a double blower would be more efficient, but not if its wheels
> are
>> too small.
>> Lots of trade offs here.
>>
>> thanks,
>>
>> Karen
>> 1975 26'
>>
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
>
> --
>
> *John Phillips*
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>



--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org


Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] down spout pipe
Next Topic: [GMCnet] Wheels
Goto Forum:
  


Current Time: Thu May 02 00:13:11 CDT 2024

Total time taken to generate the page: 0.01015 seconds