GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] What I found out about my LP gauge/wiring
Re: [GMCnet] What I found out about my LP gauge/wiring [message #316715 is a reply to message #316711] Thu, 27 April 2017 18:02 Go to previous messageGo to previous message
Adrien G. is currently offline  Adrien G.   United States
Messages: 474
Registered: May 2008
Location: Burns Flat, OK 73624
Karma:
Senior Member
The sending unit resistance is 90 Ohms will read empty.
Full reading will be 0 (zero) Ohms.
If the sending unit is stuck inside. Remove the tank to shake it and check ohms
or lightly drop one end to again shock the sender loose, check ohms, sometimes it works

I had a fuel tank sender that was stuck, with the tank full of fuel, a rubber hammer and a couple
of hits on the bottom, it's back to a working sender.



Adrien & Jenny Genesoto 75 Glenbrook (26-3) Mods LS3.70 FD / Reaction Sys / 80mm Front&Intermidiate / Hydroboost / 16" Tires / Frame Rebuild / Interior Rebuild Yuba City,Ca. Text 530-nine-3-three-3-nine-nine-6
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Onan repair or replace
Next Topic: Best thermostat
Goto Forum:
  


Current Time: Mon May 13 20:04:31 CDT 2024

Total time taken to generate the page: 0.01661 seconds