GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Thermasan Question: Chemical Toilet
Re: Thermasan Question: Chemical Toilet [message #315609 is a reply to message #315604] Fri, 07 April 2017 15:57 Go to previous messageGo to previous message
Matt Colie is currently offline  Matt Colie   United States
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma:
Senior Member
Ok - Ready?

A last issue Thermasan had seven components that were not hoses.
1 - The control head in the cab. It contained indicator lights, a time delay relay circuit and a control switch.
2 - A speed switch set for 45MPH (iirc)
3 - A vacuum switch that closed below 15inHg (again iirc)
4 - An RF level sensor that caused the pump to stop on low level
5 - A strainer affair with contacts for the level sensor
6 - The pump - A Cole-Parmer Peristaltic pump driven by a Delco wiper motor that was strapped to run fast.
7 - The "Sanitizer" that got strapped to the exhaust before the muffler. This was a stainless saddle with a small piece of screen and a mineral wool gasket.

I used to have a box of parts around, but that was 3 or 4 moves ago and I don't recall seeing them in my barn in the last decade.

Do they work??
Yes they work.
I built up an emissions test lab to prove that they worked. I did prove it, but there was no talking to many state environmental people and even though I was working on the commercial application, there seemed to be a very limited market. We were going after highway buses and tugboats. I was young and foolish and let my self get dragged into family/company politics a the program got dumped.

They also are real good for making tailgaters back off......

Matt


Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message icon4.gif
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: JC4 Vacuum pump operation and additional wires
Next Topic: Why Did I Order This?
Goto Forum:
  


Current Time: Mon May 13 12:48:29 CDT 2024

Total time taken to generate the page: 0.05608 seconds