GMCforum: GMCnet » Airbag Nut Torque Spec?

Home » Public Forums » GMCnet » Airbag Nut Torque Spec? (Just want to confirm)

Show: Today's Messages :: Polls :: Message Navigator

Re: Airbag Nut Torque Spec? [message #315104 is a reply to message #315103]

Sat, 25 March 2017 12:44

Matt Colie

Messages: 8547
Registered: March 2007
Location: S.E. Michigan

Karma:

Senior Member

bryhart wrote on Sat, 25 March 2017 13:27

This is for the big end nuts obviously. I think the manual says 50-60 ft/lbs. I don't know why but that seemed low to me. Can anyone confirm?

Thank,
--Bryan

Bryan,
That is what the build book lists.
Are you thinking it is low because the parts involved are large?
They have nothing to do with the final situation. The ends of the Airspring are always in compression. All those big nuts are for is to make sure that the parts do stray.

Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

[Message index]

		Airbag Nut Torque Spec? By: bryhart on Sat, 25 March 2017 12:27
		Re: Airbag Nut Torque Spec? By: Matt Colie on Sat, 25 March 2017 12:44
		Re: [GMCnet] Airbag Nut Torque Spec? By: powwerjon on Sat, 25 March 2017 13:00
		Re: [GMCnet] Airbag Nut Torque Spec? By: bryhart on Sat, 25 March 2017 14:34

Previous Topic:	Re: [GMCnet] Electrical Short found but it wasn't easy
Next Topic:	FYI E3 Spark plug sale

Goto Forum:

-=] Back to Top [=-

Current Time: Thu May 09 07:55:46 CDT 2024

Total time taken to generate the page: 0.05847 seconds