Re: [GMCnet] Tranny Trouble - the dreaded governor gear gremlin. UPDATE: It works!!! :-) [message #314949 is a reply to message #314948] |
Mon, 20 March 2017 09:55 |
James Hupy
Messages: 6806 Registered: May 2010
Karma:
|
Senior Member |
|
|
Russell, I would strongly suggest that you remove your lower speedometer
cable ( inner and outer) inspect it very carefully, and lubricate it with
cable lube of your choosing. Insulate the lower part that passes near the
header, and loosely ty-wrap it away from the header. If it melts
internally, it will freeze up and strip out the governor gear.
Jim Hupy
Salem, Or
78 GMC ROYALE 403
On Mar 20, 2017 6:58 AM, "Russell Keith" wrote:
Ray, You're right, the governor gear does not look bad at all. When I
pulled it, I started to second guess my original diagnosis. The tranny
would
not upshift out of first gear, and would even pop out of gear. The vacuum
hose on the modulator looked pretty rough, and was cracked, so I replaced
it as well. If I would have replaced the vacuum line first, I probably
didn't need the governor. Oh well, I certainly learned a lot along the way.
Life with a GMC....learn something new everyday. :)
--
Russell Keith
1978 Eleganza II
Dunedin, Florida
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|