GMCforum: GMCnet » Norcold refrigerator install

Home » Public Forums » GMCnet » Norcold refrigerator install (flexible vent material)

Show: Today's Messages :: Polls :: Message Navigator

Norcold refrigerator install [message #310014]

Sun, 06 November 2016 19:10

Jack Ramsey

Messages: 82
Registered: December 2012
Location: Tulare, CA

Karma:

Member

I am finishing up the Norcold 2 way and have built a complete insulated structure and venting as per all the instructions and recommendations, including the divider to keep the hot exhaust off the top of the NXA614. Before I seal it in, I need to install some sort of flexible material between the insulated structure and the body exhaust vent on the roof. What is the best material for this? I am thinking it would be the best way to keep propane exhaust out of the living area to use some fabric type material for this area and around the side fresh air intake so the loop is isolated from the interior living area.

Thanks,

Jack

Jack Ramsey Tulare, CA TZE165V101526 1975 Palm Beach

Report message to a moderator

[Message index]

		Norcold refrigerator install By: Jack Ramsey on Sun, 06 November 2016 19:10
		Re: Norcold refrigerator install By: jhbridges on Tue, 08 November 2016 09:40

Previous Topic:	[GMCnet] We built our dream GMC.
Next Topic:	[GMCnet] Pulling the 6000w Owan. Are you kiding me. Just 8 -1/4 inch bolts.

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Apr 25 23:00:43 CDT 2024

Total time taken to generate the page: 0.01294 seconds