GMCforum: GMCnet » [GMCnet] External feel lines

Home » Public Forums » GMCnet » [GMCnet] External feel lines

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] External feel lines [message #303762 is a reply to message #303748]

Mon, 18 July 2016 11:06

roy1

Messages: 2126
Registered: July 2004
Location: Minden nevada

Karma:

Senior Member

A number of things can add to the vapor lock problem. I haven't had it since I replaced the fuel lines . Removed the selector valve by using 2 carter electric pumps outside the frame rails insulated the fuel lines and ran the line up the rear of the engine to the carb eleminating the mechanical pump. I also put deflectors between the tanks and the exhaust pipe. My intake manifold was filled at an earlier time.

Roy Keen Minden,NV 76 X Glenbrook

Report message to a moderator

[Message index]

		[GMCnet] External feel lines By: Lawrence Schmitt on Mon, 18 July 2016 08:42
		Re: [GMCnet] External feel lines By: JohnL455 on Mon, 18 July 2016 09:33
		Re: [GMCnet] External feel lines By: jhbridges on Mon, 18 July 2016 09:49
		Re: [GMCnet] External feel lines By: armandminnie on Mon, 18 July 2016 10:36
		Re: [GMCnet] External feel lines By: jimk on Mon, 18 July 2016 14:40
		Re: [GMCnet] External feel lines By: jhbridges on Mon, 18 July 2016 10:47
		Re: [GMCnet] External feel lines By: roy1 on Mon, 18 July 2016 11:06

Previous Topic:	Looking for Dimensioned Drawings of Chassis Frame Rails
Next Topic:	Fresh Water Pump

Goto Forum:

-=] Back to Top [=-

Current Time: Tue May 14 17:50:18 CDT 2024

Total time taken to generate the page: 0.00968 seconds