GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Looking for Dimensioned Drawings of Chassis Frame Rails (Dimensioned Drawings of Chassis)
Looking for Dimensioned Drawings of Chassis Frame Rails [message #303709] Sun, 17 July 2016 15:45 Go to previous message
dalefx is currently offline  dalefx   United States
Messages: 2
Registered: June 2016
Location: Los Angeles
Karma:
Junior Member
I'm restoring a 75 Transmode and am interested in fabricating new stronger, thicker, stiffer and more robust chassis frame rails. I'm inquiring if any dimensioned drawings exist of the GMC chassis?

I'm also designing and building a tube steel full length ladder frame to stiffen the floor beams and help to stiffen the body. This ladder frame will be resting on the rubber isolation pads. Reference drawings of the chassis would be helpful in creating my CAD designs of these pieces, ladder frame and chassis frame rails.

I'm new here and would greatly appreciate any help

Best,

Dale

Contact: dalefx at yahoo dot com three one o seven seven five o three one two

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: LED dimmers
Next Topic: [GMCnet] External feel lines
Goto Forum:
  


Current Time: Wed Apr 24 22:50:03 CDT 2024

Total time taken to generate the page: 0.01380 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software