GMCforum: GMCnet » BF (4.0) Dipstick blow-out fix

Home » Public Forums » GMCnet » BF (4.0) Dipstick blow-out fix

Show: Today's Messages :: Polls :: Message Navigator

Re: BF (4.0) Dipstick blow-out fix [message #302884 is a reply to message #302754]

Thu, 30 June 2016 13:02

Chris Tyler

Messages: 458
Registered: September 2013
Location: Odessa FL

Karma:

Senior Member

Another option: Clean the dipstick with carb cleaner on both sides. Coat the tube with vasoline, then put a small dab of RTV silicone on the stick. Once it sets up, remove and clean off the vasoline. Custom made seal.

I have also seen racers use a thumb screw type hose clamp to secure it

76 Glenbrook

Report message to a moderator

[Message index]

		BF (4.0) Dipstick blow-out fix By: Matt Colie on Tue, 28 June 2016 10:42
		Re: BF (4.0) Dipstick blow-out fix By: A Hamilto on Tue, 28 June 2016 11:35
		Re: BF (4.0) Dipstick blow-out fix By: JohnL455 on Tue, 28 June 2016 12:26
		Re: [GMCnet] BF (4.0) Dipstick blow-out fix By: Tangerine on Thu, 30 June 2016 05:33
		Re: [GMCnet] BF (4.0) Dipstick blow-out fix By: Bullitthead on Thu, 30 June 2016 11:16
		Re: BF (4.0) Dipstick blow-out fix By: Chris Tyler on Thu, 30 June 2016 13:02
		Re: BF (4.0) Dipstick blow-out fix By: Matt Colie on Fri, 01 July 2016 17:00
		Re: BF (4.0) Dipstick blow-out fix By: John Heslinga on Sat, 02 July 2016 20:24
		Re: BF (4.0) Dipstick blow-out fix By: cbryan on Sat, 19 August 2017 15:55
		Re: [GMCnet] BF (4.0) Dipstick blow-out fix By: Olly Schmidt on Sat, 19 August 2017 16:05

Previous Topic:	[GMCnet] High Milage oil filters. REALLY?
Next Topic:	[GMCnet] Than you all for your help. We learn a lot here. This is a link to the renovation pictures if you care to see them.

Goto Forum:

-=] Back to Top [=-

Current Time: Thu May 16 12:16:10 CDT 2024

Total time taken to generate the page: 0.01705 seconds