GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » BF (4.0) Dipstick blow-out fix
Re: [GMCnet] BF (4.0) Dipstick blow-out fix [message #302863 is a reply to message #302754] Thu, 30 June 2016 05:33 Go to previous messageGo to previous message
Tangerine is currently offline  Tangerine   United States
Messages: 192
Registered: February 2004
Location: Livonia, MI
Karma:
Senior Member
On 6/28/2016 11:42 AM, Matt Colie wrote:
> Our otherwise great Onan erupted into a cloud of smoke at the fireworks. I shut it down promptly.
> The dipstick has gotten so loose in the tube that not only does it not seal, but the crankcase pressure will easily blow by it.
> I wrapped it with teflon tape and put it back on-line as it was a hot night. This worked, but I know it won't last long.
> The seal does not look replaceable. JimK might have new, but the shipping would have to exceed the part cost.
>
> Does anybody have a plan to make the dipstick stay tight?
>
> Matt
>
I added some "O" rings to mine. It stayed in place and sealed the tube.

--
Gary W. Mills
Livonia, MI
. ___________
./_][__][] []| 1974 GMC M/H
.*O-------OO-* Painted Desert


_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



1974 GMC 260
Tangerine Dream
Livonia Michigan
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] High Milage oil filters. REALLY?
Next Topic: [GMCnet] Than you all for your help. We learn a lot here. This is a link to the renovation pictures if you care to see them.
Goto Forum:
  


Current Time: Thu May 16 04:42:39 CDT 2024

Total time taken to generate the page: 0.02951 seconds