GMCforum: GMCnet » Re: [GMCnet] Steering box rebuilder and Dothan

Home » Public Forums » GMCnet » Re: [GMCnet] Steering box rebuilder and Dothan

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Steering box rebuilder and Dothan [message #299185 is a reply to message #299011]

Sun, 17 April 2016 13:39

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma:

Senior Member

I like the idea of a Zerk fitting... if the thing isn't so hardened alls it does is chew up drill bits. Someplace I have a tub of the same grease, which was mandated for Cessna flap jackscrews. Laced with some sulfate or other which was desirable. It cost three times as much, but Elro paid for it and said 'take it'. He had several full tubs of it.

--johnny

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

Report message to a moderator

[Message index]

		Re: [GMCnet] Steering box rebuilder and Dothan By: Tom Whitton on Thu, 14 April 2016 10:40
		Re: [GMCnet] Steering box rebuilder and Dothan By: lqqkatjon on Thu, 14 April 2016 11:05
		Re: [GMCnet] Steering box rebuilder and Dothan By: A Hamilto on Thu, 14 April 2016 11:15
		Re: [GMCnet] Steering box rebuilder and Dothan By: jimk on Thu, 14 April 2016 22:30
		Re: [GMCnet] Steering box rebuilder and Dothan By: Loffen on Fri, 15 April 2016 06:43
		Re: [GMCnet] Steering box rebuilder and Dothan By: jhbridges on Fri, 15 April 2016 19:24
		Re: [GMCnet] Steering box rebuilder and Dothan By: Matt Colie on Sat, 16 April 2016 10:24
		Re: [GMCnet] Steering box rebuilder and Dothan By: Tom Whitton on Fri, 15 April 2016 21:53
		Re: [GMCnet] Steering box rebuilder and Dothan By: jhbridges on Sun, 17 April 2016 10:05
		Re: [GMCnet] Steering box rebuilder and Dothan By: Ken Henderson on Sun, 17 April 2016 13:15
		Re: [GMCnet] Steering box rebuilder and Dothan By: jhbridges on Sun, 17 April 2016 13:39

Previous Topic:	[GMCnet] Water lines
Next Topic:	[GMCnet] Honda 6010 wiring question

Goto Forum:

-=] Back to Top [=-

Current Time: Wed May 15 00:45:26 CDT 2024

Total time taken to generate the page: 0.04561 seconds