GMCforum: GMCnet » Setting the front ride height procedure

Home » Public Forums » GMCnet » Setting the front ride height procedure

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Setting the front ride height procedure [message #292904 is a reply to message #292884]

Thu, 24 December 2015 23:46

Scott Nutter

Messages: 782
Registered: January 2015
Location: Houston/San Diego

Karma:

Senior Member

Rob,
So sorry for your loss.........Anything I can do to help, just let me know....but the only thing I'm really good at is mixing drinks.....

Your quotes from the supplement manual 77-78 were the same exact wording I was referencing to. Not once in the manual did I see anywhere about raising the tires off the ground.

But upon further research, the manuals from 1973 specifically mention to RAISE the vehicle off the ground........I quess this is why I'm confused....
Wouldn't the 77-78 supplemental manual superceide the the 1973 manual?

The only time the supplemental manual mentions anything about stripping a bolt is in reference to the alignment bolt when not using the unloader tool.

Could the unloader tool they used back when the manual was written have been made of better quality metals than what we are seeing today? The only reason I say this is because about 80% of the responses are for lifting the wheels off the ground. If you had a tool that was stout enough and would not strip, then wouldn't lifting the tires off the ground would be irrelevant?

I'm not trying to out smart anyone, I'm just trying to get the best plan together before I start the height adjustment. Scott

Scott Nutter 1978 Royale Center Kitchen, Patterson 455, switch pitch tranny, 3.21 final drive, Quad bags, Dave Lenzi super duty mid axle disc brakes, tankless water heater, everything Lenzi. Alex Ferrera installed MSD Atomic EFI Houston, Texas

[Updated on: Fri, 25 December 2015 02:15]

Report message to a moderator

[Message index]

		Setting the front ride height procedure By: Scott Nutter on Wed, 23 December 2015 12:46
		Re: Setting the front ride height procedure By: Harry on Wed, 23 December 2015 15:18
		Re: [GMCnet] Setting the front ride height procedure By: jimk on Wed, 23 December 2015 15:28
		Re: [GMCnet] Setting the front ride height procedure By: Harry on Wed, 23 December 2015 15:46
		Re: [GMCnet] Setting the front ride height procedure By: Ken Burton on Thu, 24 December 2015 06:02
		Re: [GMCnet] Setting the front ride height procedure By: Mr ERFisher on Thu, 24 December 2015 06:22
		Re: [GMCnet] Setting the front ride height procedure By: Scott Nutter on Thu, 24 December 2015 11:15
		Re: [GMCnet] Setting the front ride height procedure By: Ken Burton on Thu, 24 December 2015 12:14
		Re: [GMCnet] Setting the front ride height procedure By: James Hupy on Thu, 24 December 2015 12:17
		Re: [GMCnet] Setting the front ride height procedure By: powwerjon on Thu, 24 December 2015 12:32
		Re: [GMCnet] Setting the front ride height procedure By: powwerjon on Thu, 24 December 2015 12:40
		Re: [GMCnet] Setting the front ride height procedure By: Scott Nutter on Thu, 24 December 2015 15:27
		Re: [GMCnet] Setting the front ride height procedure By: USAussie on Thu, 24 December 2015 16:18
		Re: [GMCnet] Setting the front ride height procedure By: Scott Nutter on Thu, 24 December 2015 23:46
		Re: [GMCnet] Setting the front ride height procedure By: Larry on Thu, 24 December 2015 13:54
		Re: [GMCnet] Setting the front ride height procedure By: Ken Burton on Fri, 25 December 2015 07:27
		Re: [GMCnet] Setting the front ride height procedure By: Scott Nutter on Mon, 18 January 2016 01:19
		Re: [GMCnet] Setting the front ride height procedure By: Ken Burton on Mon, 18 January 2016 02:35
		Re: [GMCnet] Setting the front ride height procedure By: Dolph Santorine on Mon, 18 January 2016 08:06
		Re: [GMCnet] Setting the front ride height procedure By: Scott Nutter on Mon, 18 January 2016 09:03
		Re: [GMCnet] Setting the front ride height procedure By: Ken Burton on Tue, 19 January 2016 00:28
		Re: [GMCnet] Setting the front ride height procedure By: Bob de Kruyff on Mon, 18 January 2016 10:45
		Re: [GMCnet] Setting the front ride height procedure By: James Hupy on Mon, 18 January 2016 10:53
		Re: [GMCnet] Setting the front ride height procedure By: Scott Nutter on Mon, 18 January 2016 16:52
		Re: [GMCnet] Setting the front ride height procedure By: USAussie on Mon, 18 January 2016 17:44
		Re: [GMCnet] Setting the front ride height procedure By: Guy Lopes on Mon, 18 January 2016 18:50
		Re: [GMCnet] Setting the front ride height procedure By: USAussie on Mon, 18 January 2016 19:34
		Re: [GMCnet] Setting the front ride height procedure By: Scott Nutter on Mon, 18 January 2016 21:56
		Re: [GMCnet] Setting the front ride height procedure By: USAussie on Mon, 18 January 2016 22:51
		Re: Setting the front ride height procedure By: jhbridges on Wed, 23 December 2015 16:54
		Re: Setting the front ride height procedure By: John Sharpe on Wed, 23 December 2015 17:13
		Re: Setting the front ride height procedure By: Larry on Wed, 23 December 2015 17:32
		Re: Setting the front ride height procedure By: Scott Nutter on Wed, 23 December 2015 17:38
		Re: Setting the front ride height procedure By: Scott Nutter on Wed, 23 December 2015 17:43
		Re: Setting the front ride height procedure By: Larry on Wed, 23 December 2015 19:20
		Re: Setting the front ride height procedure By: Scott Nutter on Wed, 23 December 2015 19:51
		Re: [GMCnet] Setting the front ride height procedure By: powwerjon on Wed, 23 December 2015 19:55
		Re: [GMCnet] Setting the front ride height procedure By: hal kading on Wed, 23 December 2015 20:26
		Re: [GMCnet] Setting the front ride height procedure By: James Hupy on Wed, 23 December 2015 20:33
		Re: [GMCnet] Setting the front ride height procedure By: Scott Nutter on Wed, 23 December 2015 22:36
		Re: Setting the front ride height procedure By: JohnL455 on Mon, 18 January 2016 17:56

Previous Topic:	Off Topic: Owner's Manual for 2003-2009 GMC Topkick / Chevy Kodiak
Next Topic:	[GMCnet] Restoration, Pictures of burned GMC good b

Goto Forum:

-=] Back to Top [=-

Current Time: Mon May 27 04:26:01 CDT 2024

Total time taken to generate the page: 1.33516 seconds