GMCforum: GMCnet » Setting the front ride height procedure

Home » Public Forums » GMCnet » Setting the front ride height procedure

Show: Today's Messages :: Polls :: Message Navigator

Re: Setting the front ride height procedure [message #292832 is a reply to message #292825]

Wed, 23 December 2015 19:20

Larry

Messages: 2875
Registered: January 2004
Location: Menomonie, WI

Karma:

Senior Member

Scott Nutter wrote on Wed, 23 December 2015 17:38

As far as lifting up the front end........and once again, I haven't done this before...........
If the wheels are on the ground, not jacked up, with the unloader tool in place and the bolt tightened up to take the tension off the adjustment bolt. Shouldn't the adjustment bolt be able to be unscrewed with a socket? I don't see where any thing would be blocking it from being loosened....

That extra pressure from the coach being on the ground, puts more pressure on the unloading tool. You run the risk of stripping the screw on the unloading tool. Coach should be up with wheels hanging full down. Also make sure the screw and tip of the screw, on the unloading tool is greased.

Larry

78 Royale w/500 Caddy
Menomonie, WI.

Report message to a moderator

[Message index]

		Setting the front ride height procedure By: Scott Nutter on Wed, 23 December 2015 12:46
		Re: Setting the front ride height procedure By: Harry on Wed, 23 December 2015 15:18
		Re: [GMCnet] Setting the front ride height procedure By: jimk on Wed, 23 December 2015 15:28
		Re: [GMCnet] Setting the front ride height procedure By: Harry on Wed, 23 December 2015 15:46
		Re: [GMCnet] Setting the front ride height procedure By: Ken Burton on Thu, 24 December 2015 06:02
		Re: [GMCnet] Setting the front ride height procedure By: Mr ERFisher on Thu, 24 December 2015 06:22
		Re: [GMCnet] Setting the front ride height procedure By: Scott Nutter on Thu, 24 December 2015 11:15
		Re: [GMCnet] Setting the front ride height procedure By: Ken Burton on Thu, 24 December 2015 12:14
		Re: [GMCnet] Setting the front ride height procedure By: James Hupy on Thu, 24 December 2015 12:17
		Re: [GMCnet] Setting the front ride height procedure By: powwerjon on Thu, 24 December 2015 12:32
		Re: [GMCnet] Setting the front ride height procedure By: powwerjon on Thu, 24 December 2015 12:40
		Re: [GMCnet] Setting the front ride height procedure By: Scott Nutter on Thu, 24 December 2015 15:27
		Re: [GMCnet] Setting the front ride height procedure By: USAussie on Thu, 24 December 2015 16:18
		Re: [GMCnet] Setting the front ride height procedure By: Scott Nutter on Thu, 24 December 2015 23:46
		Re: [GMCnet] Setting the front ride height procedure By: Larry on Thu, 24 December 2015 13:54
		Re: [GMCnet] Setting the front ride height procedure By: Ken Burton on Fri, 25 December 2015 07:27
		Re: [GMCnet] Setting the front ride height procedure By: Scott Nutter on Mon, 18 January 2016 01:19
		Re: [GMCnet] Setting the front ride height procedure By: Ken Burton on Mon, 18 January 2016 02:35
		Re: [GMCnet] Setting the front ride height procedure By: Dolph Santorine on Mon, 18 January 2016 08:06
		Re: [GMCnet] Setting the front ride height procedure By: Scott Nutter on Mon, 18 January 2016 09:03
		Re: [GMCnet] Setting the front ride height procedure By: Ken Burton on Tue, 19 January 2016 00:28
		Re: [GMCnet] Setting the front ride height procedure By: Bob de Kruyff on Mon, 18 January 2016 10:45
		Re: [GMCnet] Setting the front ride height procedure By: James Hupy on Mon, 18 January 2016 10:53
		Re: [GMCnet] Setting the front ride height procedure By: Scott Nutter on Mon, 18 January 2016 16:52
		Re: [GMCnet] Setting the front ride height procedure By: USAussie on Mon, 18 January 2016 17:44
		Re: [GMCnet] Setting the front ride height procedure By: Guy Lopes on Mon, 18 January 2016 18:50
		Re: [GMCnet] Setting the front ride height procedure By: USAussie on Mon, 18 January 2016 19:34
		Re: [GMCnet] Setting the front ride height procedure By: Scott Nutter on Mon, 18 January 2016 21:56
		Re: [GMCnet] Setting the front ride height procedure By: USAussie on Mon, 18 January 2016 22:51
		Re: Setting the front ride height procedure By: jhbridges on Wed, 23 December 2015 16:54
		Re: Setting the front ride height procedure By: John Sharpe on Wed, 23 December 2015 17:13
		Re: Setting the front ride height procedure By: Larry on Wed, 23 December 2015 17:32
		Re: Setting the front ride height procedure By: Scott Nutter on Wed, 23 December 2015 17:38
		Re: Setting the front ride height procedure By: Scott Nutter on Wed, 23 December 2015 17:43
		Re: Setting the front ride height procedure By: Larry on Wed, 23 December 2015 19:20
		Re: Setting the front ride height procedure By: Scott Nutter on Wed, 23 December 2015 19:51
		Re: [GMCnet] Setting the front ride height procedure By: powwerjon on Wed, 23 December 2015 19:55
		Re: [GMCnet] Setting the front ride height procedure By: hal kading on Wed, 23 December 2015 20:26
		Re: [GMCnet] Setting the front ride height procedure By: James Hupy on Wed, 23 December 2015 20:33
		Re: [GMCnet] Setting the front ride height procedure By: Scott Nutter on Wed, 23 December 2015 22:36
		Re: Setting the front ride height procedure By: JohnL455 on Mon, 18 January 2016 17:56

Previous Topic:	Off Topic: Owner's Manual for 2003-2009 GMC Topkick / Chevy Kodiak
Next Topic:	[GMCnet] Restoration, Pictures of burned GMC good b

Goto Forum:

-=] Back to Top [=-

Current Time: Sun May 26 21:50:05 CDT 2024

Total time taken to generate the page: 1.51282 seconds