Re: Wanted front hub bearing cap/seal. [message #276976 is a reply to message #276467] |
Wed, 29 April 2015 09:28 |
77Royale
Messages: 461 Registered: June 2014 Location: Mid Michigan
Karma:
|
Senior Member |
|
|
Just a note that the dorman 13947 (Autozone) 2.5 inch ID does not fit the FRONT hub. My front hub is a hair under 3.5 inches in diameter.
That 2.5 may work for the inner cap on the REAR, but not the front.
The hunt is still on for an outer FRONT hub dust cap.
Thanks
77 Royale, Rear Dry Bath. 403, 3.55 Final Drive, Lenzi goodies, Patterson carb and dizzy.
Mid Michigan
|
|
|