GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » PD9260 installation Instructions
Re: PD9260 installation Instructions [message #271953 is a reply to message #271948] Sat, 14 February 2015 08:25 Go to previous messageGo to previous message
Matt Colie is currently offline  Matt Colie   United States
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma:
Senior Member
Ken Burton wrote on Sat, 14 February 2015 08:50
I mounted mine to the top of the cabinet which left a lot of room at the bottom for other things. As Matt says. Hook up the 12 volts (plus the added ground wire) and plug it in.

I like that Idea, but then I got thinking that I want to move the PD up front (by the passenger's right foot). This is all because I put in a Bogart Trimetric and that told me that I had a 0.3V drop at the high charging rate so it took hours longer on the generator to get the house bank (mine is in the front - its a GMC 23') back to near full.

But, I like the idea, 23s need all the storage you can find.

Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Strange Oil Pressure Drop
Next Topic: Non GMC Daily driver no crank, new battery, new starter
Goto Forum:
  


Current Time: Tue May 14 03:59:48 CDT 2024

Total time taken to generate the page: 0.01016 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software