GMCforum: GMCnet » Good by Dan

Home » Public Forums » GMCnet » Good by Dan

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Good by Dan [message #269416 is a reply to message #269415]

Sun, 11 January 2015 12:24

Kimberlea Weeks

Messages: 675
Registered: July 2010

Karma:

Senior Member

Keith and I helped at the Rio Grande Valley State Veterans Cemetery in
Mission, Texas.
If you haven't been present at a ceremony, it something to experience. kim

*Kimberlea Weeks*
VP Administration and Convention Manager
612.501.4600 | f.866.519.0047 | www.gmcmi.com

*GMC Motorhomes International*
1402 So. Cage Blvd | Unit 273 | Pharr | TX 78577-6288

*Mark this on your calendar today!*

*GMCMI 2015 Spring Convention* | Friday, March 27 to Thursday, April 2
Kemper Williams Park & Patterson Area Civic Center | Patterson, Louisiana

*GMCMI 2015 Fall Convention* | Friday, September 25 to Thursday, October 1
Central States Fairgrounds | Rapid City, South Dakota

On Sun, Jan 11, 2015 at 12:03 PM, Thomas Phipps wrote:

> The Wreaths present at the Veterans Cemetery are provided by
> www.wreathsacrossamerica.org
> I helped at the Vicksburg National Cemetery one Winter.
> I have donated to this group.
> Tom, MS II
> --
> 1975 GMC Avion
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		Good by Dan By: Ken Burton on Sat, 10 January 2015 13:27
		Re: [GMCnet] Good by Dan By: ljdavick on Sat, 10 January 2015 13:41
		Re: Good by Dan By: jknezek on Sat, 10 January 2015 14:03
		Re: [GMCnet] Good by Dan By: Jerry Wheeler on Sat, 10 January 2015 13:54
		Re: [GMCnet] Good by Dan By: James Hupy on Sat, 10 January 2015 14:34
		Re: [GMCnet] Good by Dan By: Gary Berry on Sat, 10 January 2015 15:20
		Re: Good by Dan By: Carl S. on Sat, 10 January 2015 15:22
		Re: Good by Dan By: Luvn737s on Sat, 10 January 2015 15:58
		Re: [GMCnet] Good by Dan By: Ken Henderson on Sat, 10 January 2015 16:37
		Re: Good by Dan By: kerry pinkerton on Sat, 10 January 2015 17:31
		Re: [GMCnet] Good by Dan By: Kingsley Coach on Sat, 10 January 2015 18:22
		Re: [GMCnet] Good by Dan By: ljdavick on Sat, 10 January 2015 19:19
		Re: Good by Dan By: peter bailey on Sat, 10 January 2015 18:41
		Re: Good by Dan By: Dan Borlase on Sat, 10 January 2015 20:08
		Re: Good by Dan By: Ken Burton on Sat, 10 January 2015 20:56
		Re: Good by Dan By: hal kading on Sat, 10 January 2015 23:53
		Re: [GMCnet] Good by Dan By: Sandra Price on Sun, 11 January 2015 07:27
		Re: [GMCnet] Good by Dan By: Jim Galbavy on Sun, 11 January 2015 09:34
		Re: Good by Dan By: Ken Burton on Sun, 11 January 2015 10:14
		Re: Good by Dan By: lqqkatjon on Sun, 11 January 2015 10:26
		Re: Good by Dan By: Ken Burton on Sun, 11 January 2015 10:41
		Re: Good by Dan By: tphipps on Sun, 11 January 2015 12:03
		Re: [GMCnet] Good by Dan By: Kimberlea Weeks on Sun, 11 January 2015 12:24
		Re: Good by Dan By: Gatsbys' Cruiser on Mon, 12 January 2015 12:02
		Re: Good by Dan By: Ken Burton on Mon, 12 January 2015 13:03
		Re: [GMCnet] Good by Dan By: Byron Songer on Mon, 12 January 2015 13:29
		Re: [GMCnet] Good by Dan By: Carl S. on Mon, 12 January 2015 13:49

Previous Topic:	"RPM" aluminum manifold manufacture and cost
Next Topic:	[GMCnet] Bodypads on a 78'

Goto Forum:

-=] Back to Top [=-

Current Time: Sat May 18 20:18:54 CDT 2024

Total time taken to generate the page: 0.00599 seconds