GMCforum: GMCnet » Good by Dan

Home » Public Forums » GMCnet » Good by Dan

Show: Today's Messages :: Polls :: Message Navigator

Re: Good by Dan [message #269398 is a reply to message #269373]

Sat, 10 January 2015 20:56

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma:

Senior Member

This posting was not about me. While I appreciate all of the thanks, this posting was about Dan and his loving wife Teri. Dan put up a 15 month fight and Teri was the care giver the whole way. I do not know how to say this, but Teri is one very very strong lady.

I rode along with Dan via email talking about anything that he wanted too talk about. He never gave up and was always positive. But behind Dan was always Teri making arrangements and driving him to bi-weekly appointments 160 miles one way away. Later on it turned in to bi-weekly trips, 390 miles one way. There were also additional trips that consumed 3 to 6 days each during extended hospital stays. Dan once related to me how lucky he was to have Teri managing his situation and caring fir him. He once said that Teri was the best thing that ever happened to him. So if you want to recognize someone,

PLEASE RECOGNIZE TERI.

Teri did it all for Dan, at home, on the road, and during his hospital stays. That is where the recognition needs to go. Give it to Teri who gave her all in this valiant fight.

BTW, I'm a terrible typist. So I re-did the original posting to eliminate some of the typing errors. So if something did not look right or make sense, go back to the first (now corrected) posting in this thread and read it again. Hopefully I fixed most of the wording and typing errors.

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

Report message to a moderator

[Message index]

		Good by Dan By: Ken Burton on Sat, 10 January 2015 13:27
		Re: [GMCnet] Good by Dan By: ljdavick on Sat, 10 January 2015 13:41
		Re: Good by Dan By: jknezek on Sat, 10 January 2015 14:03
		Re: [GMCnet] Good by Dan By: Jerry Wheeler on Sat, 10 January 2015 13:54
		Re: [GMCnet] Good by Dan By: James Hupy on Sat, 10 January 2015 14:34
		Re: [GMCnet] Good by Dan By: Gary Berry on Sat, 10 January 2015 15:20
		Re: Good by Dan By: Carl S. on Sat, 10 January 2015 15:22
		Re: Good by Dan By: Luvn737s on Sat, 10 January 2015 15:58
		Re: [GMCnet] Good by Dan By: Ken Henderson on Sat, 10 January 2015 16:37
		Re: Good by Dan By: kerry pinkerton on Sat, 10 January 2015 17:31
		Re: [GMCnet] Good by Dan By: Kingsley Coach on Sat, 10 January 2015 18:22
		Re: [GMCnet] Good by Dan By: ljdavick on Sat, 10 January 2015 19:19
		Re: Good by Dan By: peter bailey on Sat, 10 January 2015 18:41
		Re: Good by Dan By: Dan Borlase on Sat, 10 January 2015 20:08
		Re: Good by Dan By: Ken Burton on Sat, 10 January 2015 20:56
		Re: Good by Dan By: hal kading on Sat, 10 January 2015 23:53
		Re: [GMCnet] Good by Dan By: Sandra Price on Sun, 11 January 2015 07:27
		Re: [GMCnet] Good by Dan By: Jim Galbavy on Sun, 11 January 2015 09:34
		Re: Good by Dan By: Ken Burton on Sun, 11 January 2015 10:14
		Re: Good by Dan By: lqqkatjon on Sun, 11 January 2015 10:26
		Re: Good by Dan By: Ken Burton on Sun, 11 January 2015 10:41
		Re: Good by Dan By: tphipps on Sun, 11 January 2015 12:03
		Re: [GMCnet] Good by Dan By: Kimberlea Weeks on Sun, 11 January 2015 12:24
		Re: Good by Dan By: Gatsbys' Cruiser on Mon, 12 January 2015 12:02
		Re: Good by Dan By: Ken Burton on Mon, 12 January 2015 13:03
		Re: [GMCnet] Good by Dan By: Byron Songer on Mon, 12 January 2015 13:29
		Re: [GMCnet] Good by Dan By: Carl S. on Mon, 12 January 2015 13:49

Previous Topic:	"RPM" aluminum manifold manufacture and cost
Next Topic:	[GMCnet] Bodypads on a 78'

Goto Forum:

-=] Back to Top [=-

Current Time: Sat May 18 18:37:07 CDT 2024

Total time taken to generate the page: 0.01049 seconds