GMCforum: GMCnet » Good by Dan

Home » Public Forums » GMCnet » Good by Dan

Show: Today's Messages :: Polls :: Message Navigator

Re: Good by Dan [message #269397 is a reply to message #269373]

Sat, 10 January 2015 20:08

Dan Borlase

Messages: 743
Registered: May 2008
Location: Kelowna B.C. Canada

Karma:

Senior Member

I'll add my thanks as well Ken...sitting here struggling with the lump in my throat.
Feeling sooo grateful to have known and experienced Dan's grace and hart of servant hood.
Like the time he bailed us out, outside of Deming NM. with a broken governor gear...no tools but who need tools when you have a man like Dan in your corner.
...I know we will all miss him so

Report message to a moderator

[Message index]

		Good by Dan By: Ken Burton on Sat, 10 January 2015 13:27
		Re: [GMCnet] Good by Dan By: ljdavick on Sat, 10 January 2015 13:41
		Re: Good by Dan By: jknezek on Sat, 10 January 2015 14:03
		Re: [GMCnet] Good by Dan By: Jerry Wheeler on Sat, 10 January 2015 13:54
		Re: [GMCnet] Good by Dan By: James Hupy on Sat, 10 January 2015 14:34
		Re: [GMCnet] Good by Dan By: Gary Berry on Sat, 10 January 2015 15:20
		Re: Good by Dan By: Carl S. on Sat, 10 January 2015 15:22
		Re: Good by Dan By: Luvn737s on Sat, 10 January 2015 15:58
		Re: [GMCnet] Good by Dan By: Ken Henderson on Sat, 10 January 2015 16:37
		Re: Good by Dan By: kerry pinkerton on Sat, 10 January 2015 17:31
		Re: [GMCnet] Good by Dan By: Kingsley Coach on Sat, 10 January 2015 18:22
		Re: [GMCnet] Good by Dan By: ljdavick on Sat, 10 January 2015 19:19
		Re: Good by Dan By: peter bailey on Sat, 10 January 2015 18:41
		Re: Good by Dan By: Dan Borlase on Sat, 10 January 2015 20:08
		Re: Good by Dan By: Ken Burton on Sat, 10 January 2015 20:56
		Re: Good by Dan By: hal kading on Sat, 10 January 2015 23:53
		Re: [GMCnet] Good by Dan By: Sandra Price on Sun, 11 January 2015 07:27
		Re: [GMCnet] Good by Dan By: Jim Galbavy on Sun, 11 January 2015 09:34
		Re: Good by Dan By: Ken Burton on Sun, 11 January 2015 10:14
		Re: Good by Dan By: lqqkatjon on Sun, 11 January 2015 10:26
		Re: Good by Dan By: Ken Burton on Sun, 11 January 2015 10:41
		Re: Good by Dan By: tphipps on Sun, 11 January 2015 12:03
		Re: [GMCnet] Good by Dan By: Kimberlea Weeks on Sun, 11 January 2015 12:24
		Re: Good by Dan By: Gatsbys' Cruiser on Mon, 12 January 2015 12:02
		Re: Good by Dan By: Ken Burton on Mon, 12 January 2015 13:03
		Re: [GMCnet] Good by Dan By: Byron Songer on Mon, 12 January 2015 13:29
		Re: [GMCnet] Good by Dan By: Carl S. on Mon, 12 January 2015 13:49

Previous Topic:	"RPM" aluminum manifold manufacture and cost
Next Topic:	[GMCnet] Bodypads on a 78'

Goto Forum:

-=] Back to Top [=-

Current Time: Sat May 18 22:37:57 CDT 2024

Total time taken to generate the page: 0.01056 seconds