GMCforum: GMCnet » Good by Dan

Home » Public Forums » GMCnet » Good by Dan

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Good by Dan [message #269394 is a reply to message #269389]

Sat, 10 January 2015 19:19

ljdavick

Messages: 3548
Registered: March 2007
Location: Fremont, CA

Karma:

Senior Member

Kerry,

I don’t think it’s your monitor - it must be Ken’s message. My screen gets blurry every time I read it too.

Missing Dan.

Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, CA

> On Jan 10, 2015, at 3:31 PM, Kerry Pinkerton wrote:
>
> Thanks for representing us and the write up Ken. I had planned on driving up but we had the Grandkids and near record low temps and I was afraid the
> power would go off with me gone. I hated not being able to attend.
>
> I'm not surprised that the whole town turned out for Dan's visitation. Dan was that kind of guy.
>
> Dang, I've got to get a new monitor. This one has been getting blurry a lot the past few days.....
>
> Teri posted this on her facebook page. It is a great picture of Dan.
>
> http://www.gmcmhphotos.com/photos/member-galleries/p56865-dan-gregg.html
>
>
>
> Rest in peace my friend.
> --
> Kerry Pinkerton
>
> North Alabama, near Huntsville,
>
> 77 Eleganza II, "The Lady", 403CI, Manny Brakes, 1 ton, tranny also a 76 Eleganza to be re-bodied as an Art Deco car hauler

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy

Report message to a moderator

[Message index]

		Good by Dan By: Ken Burton on Sat, 10 January 2015 13:27
		Re: [GMCnet] Good by Dan By: ljdavick on Sat, 10 January 2015 13:41
		Re: Good by Dan By: jknezek on Sat, 10 January 2015 14:03
		Re: [GMCnet] Good by Dan By: Jerry Wheeler on Sat, 10 January 2015 13:54
		Re: [GMCnet] Good by Dan By: James Hupy on Sat, 10 January 2015 14:34
		Re: [GMCnet] Good by Dan By: Gary Berry on Sat, 10 January 2015 15:20
		Re: Good by Dan By: Carl S. on Sat, 10 January 2015 15:22
		Re: Good by Dan By: Luvn737s on Sat, 10 January 2015 15:58
		Re: [GMCnet] Good by Dan By: Ken Henderson on Sat, 10 January 2015 16:37
		Re: Good by Dan By: kerry pinkerton on Sat, 10 January 2015 17:31
		Re: [GMCnet] Good by Dan By: Kingsley Coach on Sat, 10 January 2015 18:22
		Re: [GMCnet] Good by Dan By: ljdavick on Sat, 10 January 2015 19:19
		Re: Good by Dan By: peter bailey on Sat, 10 January 2015 18:41
		Re: Good by Dan By: Dan Borlase on Sat, 10 January 2015 20:08
		Re: Good by Dan By: Ken Burton on Sat, 10 January 2015 20:56
		Re: Good by Dan By: hal kading on Sat, 10 January 2015 23:53
		Re: [GMCnet] Good by Dan By: Sandra Price on Sun, 11 January 2015 07:27
		Re: [GMCnet] Good by Dan By: Jim Galbavy on Sun, 11 January 2015 09:34
		Re: Good by Dan By: Ken Burton on Sun, 11 January 2015 10:14
		Re: Good by Dan By: lqqkatjon on Sun, 11 January 2015 10:26
		Re: Good by Dan By: Ken Burton on Sun, 11 January 2015 10:41
		Re: Good by Dan By: tphipps on Sun, 11 January 2015 12:03
		Re: [GMCnet] Good by Dan By: Kimberlea Weeks on Sun, 11 January 2015 12:24
		Re: Good by Dan By: Gatsbys' Cruiser on Mon, 12 January 2015 12:02
		Re: Good by Dan By: Ken Burton on Mon, 12 January 2015 13:03
		Re: [GMCnet] Good by Dan By: Byron Songer on Mon, 12 January 2015 13:29
		Re: [GMCnet] Good by Dan By: Carl S. on Mon, 12 January 2015 13:49

Previous Topic:	"RPM" aluminum manifold manufacture and cost
Next Topic:	[GMCnet] Bodypads on a 78'

Goto Forum:

-=] Back to Top [=-

Current Time: Sun May 26 00:18:24 CDT 2024

Total time taken to generate the page: 2.01709 seconds