GMCforum: GMCnet » Stopping a squeak on the hatch

Home » Public Forums » GMCnet » Stopping a squeak on the hatch

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Stopping a squeak on the hatch [message #268511 is a reply to message #268507]

Tue, 30 December 2014 11:49

Emery Stora

Messages: 959
Registered: January 2011

Karma:

Senior Member

You can also take a router and cut the bottom of the hatch a little deeper to give more clearance.

Emery Stora
77 Kingsley
Frederick, CO

> On Dec 30, 2014, at 9:11 AM, Jon Payne wrote:
>
> I was going to make a similar post to this one, in that my air cleaner is also rubbing on the hatch in the same exact spot. I was going to question
> whether the air cleaner should be level/parallel with the hatch as mine is not. See below pictures. Body pads were replaced several years ago and now
> I noticed the hatch rubbing on the air cleaner. Air cleaner is on the carb correctly. So I guess what needs to be replaced next is the front donuts?
> Are new ones available? I don't recall seeing them on JimKs website.
>
> Jon
>
> http://www.gmcmhphotos.com/photos/data/5607/medium/Hatch.jpg
>
> http://www.gmcmhphotos.com/photos/data/5607/medium/hatch2.jpg
>
> --
> Jon Payne
> 76 Palm Beach
> Westfield,IN
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		Stopping a squeak on the hatch By: kerry pinkerton on Mon, 29 December 2014 18:51
		Re: [GMCnet] Stopping a squeak on the hatch By: Ken Henderson on Mon, 29 December 2014 19:03
		Re: [GMCnet] Stopping a squeak on the hatch By: Ron Johnson on Tue, 30 December 2014 14:45
		Re: Stopping a squeak on the hatch By: mild bill on Mon, 29 December 2014 22:34
		Re: Stopping a squeak on the hatch By: kerry pinkerton on Tue, 30 December 2014 05:39
		Re: Stopping a squeak on the hatch By: Jon payne on Tue, 30 December 2014 10:11
		Re: [GMCnet] Stopping a squeak on the hatch By: James Hupy on Tue, 30 December 2014 10:27
		Re: [GMCnet] Stopping a squeak on the hatch By: Emery Stora on Tue, 30 December 2014 11:49
		Re: [GMCnet] Stopping a squeak on the hatch By: sgltrac on Tue, 30 December 2014 13:40

Previous Topic:	My tranny woes
Next Topic:	[GMCnet] Burning man guy

Goto Forum:

-=] Back to Top [=-

Current Time: Wed May 29 18:14:12 CDT 2024

Total time taken to generate the page: 0.35188 seconds