GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Stopping a squeak on the hatch
Re: [GMCnet] Stopping a squeak on the hatch [message #268509 is a reply to message #268507] Tue, 30 December 2014 10:27 Go to previous messageGo to previous message
James Hupy is currently offline  James Hupy   United States
Messages: 6806
Registered: May 2010
Karma:
Senior Member
Kerry, check the seal around the hatch. They collapse, lowering the cover
towards the air cleaner.
Jim Hupy
Salem, Or
78 GMC ROYALE 403
On Dec 30, 2014 8:11 AM, "Jon Payne" wrote:

> I was going to make a similar post to this one, in that my air cleaner is
> also rubbing on the hatch in the same exact spot. I was going to question
> whether the air cleaner should be level/parallel with the hatch as mine is
> not. See below pictures. Body pads were replaced several years ago and now
> I noticed the hatch rubbing on the air cleaner. Air cleaner is on the carb
> correctly. So I guess what needs to be replaced next is the front donuts?
> Are new ones available? I don't recall seeing them on JimKs website.
>
> Jon
>
> http://www.gmcmhphotos.com/photos/data/5607/medium/Hatch.jpg
>
> http://www.gmcmhphotos.com/photos/data/5607/medium/hatch2.jpg
>
> --
> Jon Payne
> 76 Palm Beach
> Westfield,IN
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: My tranny woes
Next Topic: [GMCnet] Burning man guy
Goto Forum:
  


Current Time: Wed May 29 09:13:56 CDT 2024

Total time taken to generate the page: 1.84147 seconds