GMCforum: GMCnet » 1 ton question

Home » Public Forums » GMCnet » 1 ton question

Show: Today's Messages :: Polls :: Message Navigator

Re: 1 ton question [message #268114 is a reply to message #268113]

Tue, 23 December 2014 19:23

Messages: 1262
Registered: September 2009

Karma:

Senior Member

KB wrote on Tue, 23 December 2014 17:14

Manny reams the 1ton knuckles so they have the correct taper. He had a special reamer tool made just for this.
So, if it's a Manny 1-ton kit, the taper shouldn't be an issue.

Karen
1975 26

I should qualify that: shouldn't be an issue if the reamed depth is correct (as per Bill's drawing). If Manny did it, it's likely correct
since he's done a zillion of them and has a special tool for the job.
It is my understanding some of the other kits didn't have the knuckles reamed, so the taper could be an issue.

Report message to a moderator

[Message index]

		1 ton question By: roy1 on Mon, 22 December 2014 17:28
		Re: 1 ton question By: kerry pinkerton on Mon, 22 December 2014 17:34
		Re: 1 ton question By: Hal StClair on Mon, 22 December 2014 17:39
		Re: 1 ton question By: roy1 on Mon, 22 December 2014 19:22
		Re: 1 ton question By: bwevers on Mon, 22 December 2014 19:41
		Re: 1 ton question By: KB on Tue, 23 December 2014 19:14
		Re: 1 ton question By: KB on Tue, 23 December 2014 19:23
		Re: [GMCnet] 1 ton question By: James Hupy on Tue, 23 December 2014 20:15
		Re: 1 ton question By: roy1 on Tue, 23 December 2014 20:34
		Re: 1 ton question By: bwevers on Mon, 22 December 2014 19:47
		Re: 1 ton question By: RF_Burns on Tue, 23 December 2014 13:15
		Re: 1 ton question By: roy1 on Tue, 23 December 2014 16:51
		Re: 1 ton question By: Bob de Kruyff on Fri, 26 December 2014 20:30
		Re: 1 ton question By: JohnL455 on Sat, 27 December 2014 10:23
		Re: 1 ton question By: roy1 on Sat, 27 December 2014 16:05
		Re: [GMCnet] 1 ton question By: USAussie on Sat, 27 December 2014 21:51
		Re: 1 ton question By: rcjordan on Sun, 28 December 2014 07:52
		Re: [GMCnet] 1 ton question By: Mr ERFisher on Sun, 28 December 2014 09:31
		Re: [GMCnet] 1 ton question By: Keith V on Sun, 28 December 2014 10:26
		Re: [GMCnet] 1 ton question By: Ken Henderson on Sun, 28 December 2014 11:35
		Re: [GMCnet] 1 ton question By: James Hupy on Sun, 28 December 2014 12:27
		Re: [GMCnet] 1 ton question By: roy1 on Sun, 28 December 2014 13:28
		Re: [GMCnet] 1 ton question By: Bob de Kruyff on Sun, 28 December 2014 19:54
		Re: 1 ton question By: bwevers on Sun, 28 December 2014 12:06
		Re: 1 ton question By: JohnL455 on Tue, 30 December 2014 09:49

Previous Topic:	Heater hose tee leaking
Next Topic:	My tranny woes

Goto Forum:

-=] Back to Top [=-

Current Time: Sun May 12 12:11:25 CDT 2024

Total time taken to generate the page: 0.00833 seconds