GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » 1 ton question
Re: 1 ton question [message #268105 is a reply to message #268041] Tue, 23 December 2014 13:15 Go to previous messageGo to previous message
RF_Burns is currently offline  RF_Burns   Canada
Messages: 2276
Registered: June 2008
Location: S. Ontario, Canada
Karma:
Senior Member
The upper ball joint has a taper issue. An adapter sleeve fixed it for me.

See my video.
https://www.youtube.com/watch?v=y_WeuqNQn8g

Also check my video of the steering slop caused by excess tolerances in "new" idler and relay arms. Replaced them with Dave Lenzi products and the slop was gone.
https://www.youtube.com/watch?v=bLiySgnK1uw


Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Heater hose tee leaking
Next Topic: My tranny woes
Goto Forum:
  


Current Time: Sun May 12 22:23:48 CDT 2024

Total time taken to generate the page: 0.03123 seconds