GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » My tranny woes (all my fault :()
Re: [GMCnet] My tranny woes [message #265575 is a reply to message #265570] Thu, 06 November 2014 17:59 Go to previous messageGo to previous message
Ken Henderson is currently offline  Ken Henderson   United States
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma:
Senior Member
Check manual X-7525, page 7-13 and subsequent for pressure and use in
diagnosis. On page 7-21, the first reason given for low pressure is low
ATF. Sounds like a clue that a guage MIGHT be useful.

Ken H.

On Thu, Nov 6, 2014 at 3:19 PM, Kerry Pinkerton
wrote:

> The thing that is still not clear to me is what pressure is potential
> damaging at various RPM...mainly at road speed say 2500. I'm not sure but
> don't
> have a clue but if we set an alarm at 50 psi, it seems to me that perhaps
> 51 PSI might allow the tranny to be damaged????? I don't know.
>
> Nor do I know if there is a direct relationship between PSI and fluid
> level?
> --
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 1 ton question
Next Topic: Stopping a squeak on the hatch
Goto Forum:
  


Current Time: Sat Apr 27 08:34:59 CDT 2024

Total time taken to generate the page: 0.02532 seconds