GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » oil cooler adapter gasket (how much should it be torqued?)
Re: [GMCnet] oil cooler adapter gasket [message #260638 is a reply to message #260636] Mon, 01 September 2014 13:10 Go to previous messageGo to previous message
rjw   United States
Messages: 697
Registered: September 2005
Karma:
Senior Member
USAussie wrote on Mon, 01 September 2014 13:38
Richard,

Good on Yah! You win the Aussie "It stays fixed certificate!"

http://www.gmcmhphotos.com/photos/aa-miscellaneous-photos/p33848-gmc-repair-philosophy.html

Regards,
Rob M.
The Pedantic Mechanic
USAussie - Downunder
USA '75 Avion - Double Trouble TZE365V100426
AUS '75 Avion - The Blue Streak TZE365V100428

-----Original Message-----
From: RJW

OK you talked me into it. I found a Advanced Auto Parts (30 mile round trip) that had them in stock. I'll go that route.
--
Richard

Well I hate to bare my soul, but after I thought I successfully installed the new gasket, I went to start. Well there was nothing. Then I remembered that I forgot to turn on the LP gas (I was getting it cold for today) and which caused my reefer to run on DC. Over night that killed the house (should have gone with a 2-way instead of a 3-way fridge) bank. I also neglected to turn off the air compressor (had it so I could run the compressor with the ignition off) and it ran a couple of times last night. That killed my starter battery. Got to fix those leaks from the Quad Bag system (used to be I never had to worry because i didn't have leaks with the old system). Time to rethink my electrical. Hooked an extension cord (coach is on my neighbors ramp)to the charger and finally got the Onan running. Now I am waiting on things to charge.

Older I get the stupider I get! The saying "stupid is as stupid does" applies here.



Richard
76 Palm Beach
SE Michigan
www.PalmBeachGMC.com

Roller Cam 455, TBI+EBL, 3.42 FD, 4 Bag, Macerator, Lenzi (brakes, vacuum system, front end stuff), Manny Tranny, vacuum step, Tankless + OEM water heaters.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Headliner
Next Topic: 1.25" pipe trolley?
Goto Forum:
  


Current Time: Thu May 23 06:23:27 CDT 2024

Total time taken to generate the page: 0.42806 seconds