GMCforum: GMCnet » Another great tool

Home » Public Forums » GMCnet » Another great tool (Battery impact wrenches)

Show: Today's Messages :: Polls :: Message Navigator

Re: Another great tool [message #257964 is a reply to message #256551]

Wed, 06 August 2014 11:32

RF_Burns

Messages: 2276
Registered: June 2008
Location: S. Ontario, Canada

Karma:

Senior Member

Rob,
Check your charger for it's capabilities before you spend $$$ on NiMh batteries. NiCads are pretty easy to charge circuitry wise. NiMh batteries require some smarts in the charger or you will damage the cells. LiIon require even more smarts from the charger to safely charge it.

I believe NiCads should be stored with only a partial charge, NOT fully charged. NiCads are going the way of the tungsten lamp, so get them rebuilt soon.

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

[Message index]

		Another great tool By: kerry pinkerton on Fri, 25 July 2014 21:56
		Re: [GMCnet] Another great tool By: Ken Henderson on Sat, 26 July 2014 08:13
		Re: [GMCnet] Another great tool By: USAussie on Sat, 26 July 2014 08:21
		Re: [GMCnet] Another great tool By: kerry pinkerton on Sat, 26 July 2014 09:11
		Re: Another great tool By: lotsofspareparts on Sat, 26 July 2014 14:11
		Re: [GMCnet] Another great tool By: sgltrac on Sat, 26 July 2014 16:47
		Re: [GMCnet] Another great tool By: kerry pinkerton on Sat, 26 July 2014 17:45
		Re: [GMCnet] Another great tool By: sgltrac on Sat, 26 July 2014 18:20
		Re: Another great tool By: Jerry Sitzlar on Wed, 06 August 2014 00:10
		Re: Another great tool By: tphipps on Wed, 06 August 2014 08:08
		Re: [GMCnet] Another great tool By: USAussie on Wed, 06 August 2014 08:00
		Re: Another great tool By: RF_Burns on Wed, 06 August 2014 11:32
		Re: [GMCnet] Another great tool By: USAussie on Wed, 06 August 2014 20:28

Previous Topic:	Propane and generator door prop rods from roaster fork
Next Topic:	[GMCnet] Cruise Control Repair

Goto Forum:

-=] Back to Top [=-

Current Time: Sat May 18 11:57:14 CDT 2024

Total time taken to generate the page: 0.10657 seconds