GMCforum: GMCnet » Bent bogie arm

Home » Public Forums » GMCnet » Bent bogie arm

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Bent bogie arm [message #245550 is a reply to message #245527]

Fri, 28 March 2014 14:48

roy1

Messages: 2126
Registered: July 2004
Location: Minden nevada

Karma:

Senior Member

A Hamilto wrote on Fri, 28 March 2014 10:27

Ken Henderson wrote on Fri, 28 March 2014 12:13

...Severe wear on the inside sounds more like negative camber (wheel leaning in at the top) to me. That will probably require a "Sirum Arm" -- a long 2"-3" pipe welded to an old wheel rim to use as a lever. You can, as suggested, shim the bogie to correct that -- but ONLY if BOTH wheels are equally incorrect.

HTH,

Ken H.

Has anyone ever shimmed the spindle to fix camber on a single rear wheel, when a "Sirum Arm" is not available?

Would correctly placed shims between the spindle and the swing arm correct alignment enough to reduce tire wear and get you someplace where the swing arm can be straightened?

I paid a frame shop to fix my bogies years ago. They made them much better but I still had tires wearing an inside or out side treads so to fix the problem tires I added shims as need on the top or bottom between the frame and the bogie where they were needed. It was a little time consuming for me but it corrected the uneven wear of the treads.

Roy Keen Minden,NV 76 X Glenbrook

Report message to a moderator

[Message index]

		Bent bogie arm By: 77PBFinland on Thu, 27 March 2014 16:33
		Re: Bent bogie arm By: appie on Thu, 27 March 2014 16:41
		Re: Bent bogie arm By: GMC Cruse on Thu, 27 March 2014 17:04
		Re: Bent bogie arm By: C Boyd on Thu, 27 March 2014 17:14
		Re: Bent bogie arm By: Loffen on Thu, 27 March 2014 18:14
		Re: Bent bogie arm By: Ken Burton on Thu, 27 March 2014 18:38
		Re: [GMCnet] Bent bogie arm By: k2gkk on Fri, 28 March 2014 09:59
		Re: [GMCnet] Bent bogie arm By: Little Yimmy on Fri, 28 March 2014 10:08
		Re: [GMCnet] Bent bogie arm By: james Ernst on Fri, 28 March 2014 10:48
		Re: [GMCnet] Bent bogie arm By: Billy Massey on Thu, 27 March 2014 19:49
		Re: [GMCnet] Bent bogie arm By: USAussie on Thu, 27 March 2014 19:59
		Re: Bent bogie arm By: Bob de Kruyff on Thu, 27 March 2014 19:56
		Re: [GMCnet] Bent bogie arm By: Kingsley Coach on Thu, 27 March 2014 20:21
		Re: [GMCnet] Bent bogie arm By: corleyw on Thu, 27 March 2014 21:24
		Re: [GMCnet] Bent bogie arm By: USAussie on Thu, 27 March 2014 22:35
		Re: [GMCnet] Bent bogie arm By: Bob de Kruyff on Thu, 27 March 2014 22:56
		Re: [GMCnet] Bent bogie arm By: corleyw on Fri, 28 March 2014 11:37
		Re: [GMCnet] Bent bogie arm By: USAussie on Fri, 28 March 2014 17:45
		Re: Bent bogie arm By: kerry pinkerton on Fri, 28 March 2014 07:27
		Re: [GMCnet] Bent bogie arm By: Ken Henderson on Thu, 27 March 2014 22:49
		Re: [GMCnet] Bent bogie arm By: gbarrow2 on Fri, 28 March 2014 11:35
		Re: [GMCnet] Bent bogie arm By: roy1 on Fri, 28 March 2014 11:45
		Re: [GMCnet] Bent bogie arm By: dwayne jacobson[1] on Fri, 28 March 2014 12:04
		Re: [GMCnet] Bent bogie arm By: gbarrow2 on Fri, 28 March 2014 12:08
		Re: [GMCnet] Bent bogie arm By: Mr ERFisher on Fri, 28 March 2014 12:05
		Re: [GMCnet] Bent bogie arm By: Ken Henderson on Fri, 28 March 2014 12:13
		Re: [GMCnet] Bent bogie arm By: A Hamilto on Fri, 28 March 2014 12:27
		Re: [GMCnet] Bent bogie arm By: roy1 on Fri, 28 March 2014 14:48
		Re: [GMCnet] Bent bogie arm By: gbarrow2 on Fri, 28 March 2014 14:29
		Re: [GMCnet] Bent bogie arm By: Ken Burton on Sat, 29 March 2014 00:47
		Re: [GMCnet] Bent bogie arm By: Ken Burton on Sat, 29 March 2014 01:13
		Re: [GMCnet] Bent bogie arm By: gbarrow2 on Sat, 29 March 2014 08:11
		Re: [GMCnet] Bent bogie arm By: John Olson on Sat, 29 March 2014 10:55
		Re: [GMCnet] Bent bogie arm By: A Hamilto on Sat, 29 March 2014 11:29
		Re: [GMCnet] Bent bogie arm By: 77PBFinland on Sun, 31 January 2016 12:20
		Re: [GMCnet] Bent bogie arm By: roy1 on Sun, 31 January 2016 12:32
		Re: [GMCnet] Bent bogie arm By: jimk on Sun, 31 January 2016 18:32
		Re: [GMCnet] Bent bogie arm By: Ken Henderson on Sun, 31 January 2016 19:51
		Re: [GMCnet] Bent bogie arm By: Ken Burton on Sat, 29 March 2014 11:41
		Re: [GMCnet] Bent bogie arm By: James Hupy on Sat, 29 March 2014 11:52
		Re: [GMCnet] Bent bogie arm By: Ken Burton on Sat, 29 March 2014 17:04
		Re: [GMCnet] Bent bogie arm By: James Hupy on Sat, 29 March 2014 18:00
		Re: [GMCnet] Bent bogie arm By: Ken Henderson on Sat, 29 March 2014 18:49
		Re: Bent bogie arm By: 77PBFinland on Fri, 28 March 2014 15:33
		Re: [GMCnet] Bent bogie arm By: USAussie on Fri, 28 March 2014 17:50
		Re: [GMCnet] Bent bogie arm By: corleyw on Fri, 28 March 2014 22:18
		Re: [GMCnet] Bent bogie arm By: Guy Lopes on Sat, 29 March 2014 13:26
		Re: Bent bogie arm By: Loffen on Fri, 28 March 2014 18:23
		Re: Bent bogie arm By: 77PBFinland on Sat, 29 March 2014 12:17
		Re: [GMCnet] Bent bogie arm By: USAussie on Sat, 29 March 2014 19:08
		Re: Bent bogie arm By: Ken Burton on Sat, 29 March 2014 19:42
		Re: [GMCnet] Bent bogie arm By: USAussie on Sat, 29 March 2014 21:31
		Re: [GMCnet] Bent bogie arm By: Ken Burton on Sat, 29 March 2014 22:52
		Re: [GMCnet] Bent bogie arm By: USAussie on Sat, 29 March 2014 23:30
		Re: [GMCnet] Bent bogie arm By: mickeysss on Sat, 29 March 2014 23:57
		Re: [GMCnet] Bent bogie arm By: Ken Burton on Sun, 30 March 2014 00:51
		Re: Bent bogie arm By: 77PBFinland on Sun, 30 March 2014 04:09
		Re: [GMCnet] Bent bogie arm By: Olly Schmidt on Sun, 30 March 2014 04:18
		Re: [GMCnet] Bent bogie arm By: Jerry Wheeler on Sun, 30 March 2014 07:31
		Re: [GMCnet] Bent bogie arm By: Ken Burton on Sun, 30 March 2014 08:43
		Re: Bent bogie arm By: JohnL455 on Sun, 31 January 2016 19:44
		Re: Bent bogie arm By: JohnL455 on Sun, 31 January 2016 19:54
		Re: [GMCnet] Bent bogie arm By: powwerjon on Sun, 31 January 2016 20:36
		Re: [GMCnet] Bent bogie arm By: jimk on Sun, 31 January 2016 21:25

Previous Topic:	replacement of stock interior drawer slides
Next Topic:	Re: [GMCnet] Transmission fluid leaking by the governor.

Goto Forum:

-=] Back to Top [=-

Current Time: Thu May 23 14:03:16 CDT 2024

Total time taken to generate the page: 2.74791 seconds