GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Fuel system upgrade progress
Re: Fuel system upgrade progress [message #246580 is a reply to message #245681] Sun, 06 April 2014 20:29 Go to previous messageGo to previous message
mikethebike is currently offline  mikethebike   United States
Messages: 331
Registered: January 2014
Karma:
Senior Member
Wouldn't SS safety wire have done the job much easier?

SeanKidd wrote on Sat, 29 March 2014 13:37

Ok, here is my strainer...in lieu of socks, I'm using this #30 mesh stainless steel. I had hoped on brazing or soldering it...no chance, nothing would stick to it and my mig burned right through. I wound up painstakingly weaving the ends of the wires through and bending them back. The external 100 micron filter will protect the pump, and the 10 micron paper element in the Delco filter will get the small stuff.

http://www.gmcmhphotos.com/photos/data/6560/image136.jpg
http://www.gmcmhphotos.com/photos/data/6560/image136.jpg

Here it is on the sender, I will probably put a worm clamp on to keep it in place.
http://www.gmcmhphotos.com/photos/data/6560/image137.jpg
http://www.gmcmhphotos.com/photos/data/6560/image137.jpg


[Updated on: Sun, 06 April 2014 21:25]

Report message to a moderator

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] High volume oil pumps
Next Topic: Unconnected dash wires
Goto Forum:
  


Current Time: Wed May 15 03:58:05 CDT 2024

Total time taken to generate the page: 0.01598 seconds