GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Fuel system upgrade progress
Re: Fuel system upgrade progress [message #245681 is a reply to message #242902] Sat, 29 March 2014 13:37 Go to previous messageGo to previous message
SeanKidd is currently offline  SeanKidd   United States
Messages: 747
Registered: June 2012
Location: Northern Neck Virginia
Karma:
Senior Member
Ok, here is my strainer...in lieu of socks, I'm using this #30 mesh stainless steel. I had hoped on brazing or soldering it...no chance, nothing would stick to it and my mig burned right through. I wound up painstakingly weaving the ends of the wires through and bending them back. The external 100 micron filter will protect the pump, and the 10 micron paper element in the Delco filter will get the small stuff.

http://www.gmcmhphotos.com/photos/data/6560/image136.jpg
http://www.gmcmhphotos.com/photos/data/6560/image136.jpg

Here it is on the sender, I will probably put a worm clamp on to keep it in place.
http://www.gmcmhphotos.com/photos/data/6560/image137.jpg
http://www.gmcmhphotos.com/photos/data/6560/image137.jpg


Sean and Stephanie
73 Ex-CanyonLands 26' #317 "Oliver"
Hubler 1-Ton, Quad-Bags, Rear Disc, Reaction Arms, P.Huber TBs, 3.70:1 LSD Honda 6500 inverter gen.
Colonial Travelers
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] High volume oil pumps
Next Topic: Unconnected dash wires
Goto Forum:
  


Current Time: Wed May 15 01:11:11 CDT 2024

Total time taken to generate the page: 0.07825 seconds