Re: [GMCnet] Cooling Shroud Mod [message #237543 is a reply to message #237522] |
Sun, 26 January 2014 15:28 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma:
|
Senior Member |
|
|
Terry,
The photos to which I posted the links show grille-to-radiator ducting --
side and top shields. I did not put a bottom shield in because the scoop
below the bumper, shown in the other album, serves the same purpose,
I have not tried a scoop to deflect air into the engine compartment behind
the radiator rather than through it -- the concept makes no sense to me, as
compared to making sure as much air as possible passes through the radiator.
Ken H.
On Sun, Jan 26, 2014 at 2:11 PM, terry skinner <gmcnut@msn.com> wrote:
>
>
> Ken
> Have you installed the flaps on each side of the radiator to direct the
> air thru the radiator rather than around??
>
> Have you messed with an air dam to draw hot air out of the engine
> compartment??
>
> Just curious........Terry
>
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|