GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Oil galley plug
Re: Oil galley plug [message #237221 is a reply to message #237203] Thu, 23 January 2014 20:41 Go to previous messageGo to previous message
jhb1 is currently offline  jhb1   Canada
Messages: 303
Registered: February 2004
Karma:
Senior Member
Yes do not run the engine without the hole. I picked up a 455 a few years ago as a fresh rebuild with scrap cam 40 minutes of running with no hole in the plug. This engine had all the right parts but was probably built by a Chevy guy so ended up saving a bundle on machine work.
pyolet wrote on Thu, 23 January 2014 19:05

How important is it that there be a .03 or .04 hole drilled in the aft oil galley plug for extra dizzy gear oiling like Joe Mondello insisted? Reason I'm asking is the crate engine I just picked up doesn't have a hole in the plug as it was built from the '70's book. Should I pop the plug and drill it? Thanks in advance, Woody



John H. Bell
77 Royale; QuadBag,Manny OneTon,Honda EV4010, FITech
Montreal Qc.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Electric fuel pump safety switch plumbing
Next Topic: Re: [GMCnet] How many people are still running carb, or EFI.
Goto Forum:
  


Current Time: Sat May 18 08:54:00 CDT 2024

Total time taken to generate the page: 0.06757 seconds