GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Oil galley plug
Re: [GMCnet] Oil galley plug [message #237213 is a reply to message #237208] Thu, 23 January 2014 18:47 Go to previous messageGo to previous message
James Hupy is currently offline  James Hupy   United States
Messages: 6806
Registered: May 2010
Karma:
Senior Member
The problem arises when mis matched materials are used in construction of
camshaft gears and distributor gears. Olds knew that. That is why on
agricultural, marine, and motor home applications the drilled plug is used.
The one behind the timing gear is also drilled. But, hey, will the engine
run without the hole in the plug? Yes, but, !!!
Jim Hupy
Salem, Or
78 GMC Royale 403
On Jan 23, 2014 4:27 PM, "Bill Dolinsky" <Wildbillnick@yahoo.com> wrote:

>
>
> I think there is a substantial amount of oil floating around if you dont
> restrict the feeds off the mains to the rockers. IMO it turned out to be a
> problem once he restricted oil to the top so fixed it by spraying oil on or
> near the distributor drive gear
> --
> Bill Dolinsky
> Edmonton, Alberta, Canada
> 1977 Kingsley TZE167V102169
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Electric fuel pump safety switch plumbing
Next Topic: Re: [GMCnet] How many people are still running carb, or EFI.
Goto Forum:
  


Current Time: Fri May 17 05:08:57 CDT 2024

Total time taken to generate the page: 0.01581 seconds