GMCforum: GMCnet » Removing old paint...

Home » Public Forums » GMCnet » Removing old paint...

Show: Today's Messages :: Polls :: Message Navigator

Re: Removing old paint... [message #221373 is a reply to message #221371]

Fri, 06 September 2013 18:29

Harry

Messages: 1888
Registered: October 2007
Location: Victoria, BC CANADA

Karma:

Senior Member

Sand it smooth. Leave the original paint on. That gives the new paint something to stick to. If you take it down to the aluminum, you need zinc chromate primer.
If the paint is fairly good, use a fine grit paper.
Prep is everything.

Report message to a moderator

[Message index]

		Removing old paint... By: quadracerx1 on Fri, 06 September 2013 17:27
		Re: Removing old paint... By: Keith V on Fri, 06 September 2013 17:42
		Re: Removing old paint... By: GeorgeRud on Fri, 06 September 2013 17:59
		Re: Removing old paint... By: Keith V on Fri, 06 September 2013 18:17
		Re: Removing old paint... By: Harry on Fri, 06 September 2013 18:29
		Re: Removing old paint... By: Craig Lechowicz on Fri, 06 September 2013 22:54
		Re: Removing old paint... By: roy1 on Fri, 06 September 2013 23:13
		Re: [GMCnet] Removing old paint... By: kelvin on Sat, 07 September 2013 00:16
		Re: [GMCnet] Removing old paint... By: powerjon on Sat, 07 September 2013 09:00
		Re: [GMCnet] Removing old paint... By: powerjon on Sat, 07 September 2013 11:07
		Re: [GMCnet] Removing old paint... By: Steven Ferguson on Sat, 07 September 2013 09:49
		Re: [GMCnet] Removing old paint... By: sgltrac on Sat, 07 September 2013 13:49

Previous Topic:	[GMCnet] old-style airbag
Next Topic:	[GMCnet] Branson bound -- RV Salvage near Joplin

Goto Forum:

-=] Back to Top [=-

Current Time: Sat May 11 08:09:27 CDT 2024

Total time taken to generate the page: 0.01109 seconds