Home » Public Forums » GMCnet » Vaporlock baseline temperatures
| Re: [GMCnet] Vaporlock baseline temperatures [message #211756 is a reply to message #211715] |
Fri, 21 June 2013 06:12   |
Jim Bounds
Messages: 842
Registered: January 2004
Karma:
|
Senior Member |
|
|
Mike,
Can I install a 3 port mechanical fuel pump and use the return from it to set up the same condition? A friend of mine here in Florida has done that and feels it is a major addition to his system
Jim Bounds
---------
________________________________
From: Michael Morton <memorton@charter.net>
To: gmclist@temp.gmcnet.org
Sent: Thursday, June 20, 2013 5:36 PM
Subject: Re: [GMCnet] Vaporlock baseline temperatures
Guys, I just can't believe that everyone keeps trying to over engineer this vapor lock problem. I have posted a couple times how I cured my problem and been told it wouldn’t work. After rebuilding, restoring, and racing many different things for the last 40 years, I believe in the KISS principle. (keep it simple stupid). I started racing dirt bikes, moved into go carts, drag cars, road race cars, have build 2 motorcycles that hold land speed records. But my first love is airplanes. I am a licensed aircraft and power plant mechanic and an airline captain. I have raced an airplane at Reno, flown airshows in several different aerobatic aircraft and presently maintain several war birds that I fly at shows. My main hobby is restoring antique aircraft, just finished rebuilding the 300hp engine on my airshow aircraft. Lost count of how many aircraft engines I have rebuilt over the years. I'm just saying this to show that I am no dummy when it comes to
mechanical things. I read
about coolers, tank insulation, in tank pumps, and many more ideas. All that is required is a simple fuel return line. Just tap and install a fitting in the top of the fuel filter housing at the carb, install another one in the fuel filler neck, located in the engine compartment under the drivers seat and connect the two with a 1/4 inch line. I did this 2 years ago and haven't have a hint of vapor lock problem since. Now I just use my electric fuel pump to fill the carb after a long sit to make it start easier. With the fuel constantly flowing there is little chance for vapor lock and if vapor does form it is routed back to the fuel tank. I did say to install the fitting on the top of the fuel filter housing, didn't I? This maintains reliable fuel to the carb bowl. Most carburated and fuel injected aircraft use a fuel return to combat vapor lock. All the cars I own I have bought salvage and rebuilt so I know them inside and out, my BMW, and Ford F150
with fuel injection use
fuel returns, hell even my carburated 1985 Jeep CJ7, and 1966 AC Cobra use a fuel return. Just keep it simple, install a fuel return and enjoy your ride. After all, we are dealing with a motor home built in the 70s using 50s technology, it's not rocket science.
Sorry to toot my horn, but this is not my first rodeo.
Mike Morton
1975 Eleganza (Sloopy)
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
Current Time: Mon May 27 16:35:56 CDT 2024
Total time taken to generate the page: 2.53568 seconds
|
GMCforum
Search
Help
Register
Login
Home
