GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Got Double Trouble weighed at a CAT Scale
Re: [GMCnet] Got Double Trouble weighed at a CAT Scale [message #182962 is a reply to message #182880] Sun, 02 September 2012 23:45 Go to previous messageGo to previous message
GMC_LES is currently offline  GMC_LES   United States
Messages: 569
Registered: October 2009
Location: Montreal
Karma:
Senior Member
Well,
I gained access to my two front frame clips today to do a comparision. I've taken photos and will try to find the time to annotate them and upload them to the photo site on monday My mind appears to have exaggerated the differences. The only differences I can see now that I put them side by side is the gusseting/bracing for the rear lower control arm mounting bracket. Before putting them side by side I would have sworn that the frames were shaped slightly different. It now appears that what I saw was just an optical illusion due to poor lighting when I made a quick comparision in the spring.

The differences are evident, just less significant. I'll fill y'all in soon with the photos.

Les Burt
Montreal



On 2012-09-02, at 10:16 AM, "Rob Mueller" <robmueller@iinet.net.au> wrote:

> Les,
>
> When you do post the pictures of the two front clips PLEASE give the message a title like:
>
> 1974 - 1978 Front Frame Comparison
>
> That way we'll be able to find it easily in the future.
>
> Regards,
> Rob M.
>
> -----Original Message-----
> From: Les Burt
>
>
> Ok
> I'll try to take some photos this weekend.
>
> Les Burt
> Montreal
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Les Burt Montreal 1975 Eleganza 26ft A work in Progress
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Save those old starter solenoids. Or at least save the copper contact washers.
Next Topic: Body Pads
Goto Forum:
  


Current Time: Thu May 16 14:49:37 CDT 2024

Total time taken to generate the page: 0.01762 seconds